integra wheel bearing issue, new bearing is too small
i have a 97 integra rs at the shop getting some new wheel bearings, turns out that no wheel bearing we order from anywhere fits. everyone for any civic/teg is too small, prelude/accord bearings are way too big.
the OD of hte bearing we pressed out is 79.10mm, the parts acura gives us are 78mm. .... we have no idea wtf is going on here and need to get this car out of here.
has anyone seen anything like this or have any idea why nothing fits.......
Re: integra wheel bearing issue, new bearing is too small (Targa250R)
92-95 civics have two different wheel bearings. an abs, and non-abs bearing. if you go to your local parts store, im sure they can get you the bearing you need.
ive ran into this issue before. and i think your rs is no abs, am i right?
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.