bayFERIOroan

Been searching for a dang good while now and have seen alot of threads and write ups but haven't been able to find any part numbers or a place to purchase the integra sway bar mounts. I bought a 14mm sway bar off an integra for 5 bucks and will be installing it on my 94 four door civic and just need the mounts to get it on the car. Thanks for any help guys

bayFERIOroan

No one? Dang that sucks

ferio-ichi3

Why not buy adjustable ones?

bayFERIOroan

They sell adjustable mounts that mount the bar to the subframe? Where would I find em? Thanks for the response

ferio-ichi3

Wait, you mean to mount it up to the frame of the car? Or the lower control arms?

ferio-ichi3

No no no, i hust read what you ment. You need a subframe brace. Asr, ff etc can be had for roughly 200 bucks

bayFERIOroan

And there's no where I can just buy the OEM mounts? I've read up on this sway bar amd other sway bars and read up don't need the subframe brace unless ur bar is over 20mm?

ferio-ichi3

I think its 17mm but true that, but id run a brace for insurance. But if not, i believe you need the d brackets, and longer bolts? Its a start man

bayFERIOroan

Found this do u think the ones here would work?
http://www.hondaautomotiveparts.com/...REAR+LOWER+ARM

bayFERIOroan

Okay I guess I'm breaking down and buying a subframe brace kit now last question, will the OEM D brackets for the front sway bar fit the rear? Buddy a few towns over said he might have some but they're for the front. If not I noticed energy suspension sells some universal ones but there's two different ones I dk I they'll hold the same bushings or not

Reyes

iTrader: (1)

You just need the OEM Integra subframe brackets. they can be found at any Acura dealer. For a stock bar you do not need a whole subframe brace. Part#'s 28-29 and 30 in the diagram that you found. But I would make sure that you buy them for the Integra. the bolt spacing will vary depending on the size of the OEM sway bar.