How do I remove a badly stripped rear lower control arm bolt?
#1
How do I remove a badly stripped rear lower control arm bolt?
I need help to remove the rear lower control arm bolt on my ej1 it's the bolt that connects the lca to the subframe, I've tried everything I even took it to a shop and they couldn't even remove it
#2
The Grumpiest
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: How do I remove a badly stripped rear lower control arm bolt?
If the shop couldn't do it I don't know what strangers on a forum are supposed to tell you.
What steps did you and the shop take to remove it?
What steps did you and the shop take to remove it?
#7
Honda-Tech Member
Join Date: Apr 2007
Location: GTA, ON
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do I remove a badly stripped rear lower control arm bolt?
If the shop tried to heat the bolt up with a torch and it still wouldn't come out of the welded on nut on the subframe (I'm assuming this is what you're talking about) then you may have to cut that welded nut off with a grinder, then replace the nut and tack it back on in place.
You would possibly also have to use a cut off wheel on a grinder like spAdam showed or a reciprocating saw to cut the bolt again to be able to get it out and the control arm out. If the bolt is seized in the control arm bushing either replace the bushing or the whole arm at the same time.
You would possibly also have to use a cut off wheel on a grinder like spAdam showed or a reciprocating saw to cut the bolt again to be able to get it out and the control arm out. If the bolt is seized in the control arm bushing either replace the bushing or the whole arm at the same time.
Trending Topics
#8
Honda-Tech Member
Join Date: Sep 2006
Location: MARYLAND, united states
Posts: 1,082
Likes: 0
Received 1 Like
on
1 Post
Re: How do I remove a badly stripped rear lower control arm bolt?
Whenever I run into this problem I put a 19 socket and break the welded nut off. Its just tack welded. Then 9 times outta 10 the bolt slides out unless its seized to the bushing sleeve which then you gotta cut the bolt.
#9
Honda-Tech Member
Join Date: Feb 2014
Location: San Diego, CA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do I remove a badly stripped rear lower control arm bolt?
There is always the method where you hammer a size smaller socket on to it, then use an impact hammer @full torque and hope it takes it off before it rips the head.
#10
Honda-Tech Member
Join Date: Nov 2014
Location: Torrance, CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
LutherX
Honda Civic / Del Sol (1992 - 2000)
5
08-21-2011 07:59 AM
Tong.Y
Honda Civic / Del Sol (1992 - 2000)
5
06-14-2010 12:33 AM
ophdehEEzY
Acura Integra
8
09-08-2003 04:53 PM