I have a 95 gsr, it has a 4 lug and i want to convert it to 5 lug so i can put on type r rims. do I buy a conversion kit or get a like a rsx disks, etc.
You can piece it together easily with new parts, or you can buy a conversion kit full of used parts needing replacement for roughly the same amount of money. Your choice.
Originally Posted by Evs-One
Most people just weld on the new hub and call it a day
You don't weld anything.
Originally Posted by EJ1_Ex
you can also purchase prelude 5 lug conversion. I believe they are the same lug pattern. Might be cheaper to go that way.
You don't use Prelude/Accord hubs.
Originally Posted by NeverLift
i dont want to spend more $300. as i stated before is there any type of "adapter"?
Hub adapters should not be used. They cause more headaches than doing it the right way. If you don't want to spend more than $300, then you cannot afford to do this without half-assing it so I suggest that you forget it altogether.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.