Ground Control srping rate + Tokico Blue
#1
Junior Member
Thread Starter
Join Date: Mar 2008
Location: The Bay, ca
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Ground Control srping rate + Tokico Blue
I was going to pick up gc + tokico blues
dude said front spring rate was 250 and rear
was 180. How would this ride with the tokico blues?
dude said front spring rate was 250 and rear
was 180. How would this ride with the tokico blues?
#2
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,530
Likes: 0
Received 52 Likes
on
46 Posts
Re: Ground Control srping rate + Tokico Blue
like shAt... HP's will blow out in short order. They just cannot handle stiff spring rates or riding low. Should have gone with Illuminas as a minimum for GC's.
#4
Junior Member
Thread Starter
Join Date: Mar 2008
Location: The Bay, ca
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
#5
Honda-Tech Member
Join Date: Apr 2009
Location: San Diego, CA
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
#6
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,530
Likes: 0
Received 52 Likes
on
46 Posts
Re: Ground Control srping rate + Tokico Blue
If you use the lower perch settings with aftermarket lowering springs, though, the front end is liable to be damn near on the ground, and the rear not so much. I'm using stock GS-R springs up front and stock ITR springs in the rear on the lower Koni perch setting all around and it sits and rides nice.
Your best bet, though, would be to go with Koni + Koni-specific GC sleeves. Then you have total ride height control.
#7
Honda-Tech Member
Join Date: Dec 2007
Location: Shingle Springs, ca, united states
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ground Control srping rate + Tokico Blue
Thread
Thread Starter
Forum
Replies
Last Post