Chefskinny

Hi all,

Done a fair bit of research and just want to confirm that I am correct before I go ahead and order stainless lines.

Car is a 98' cx hatch

Swapping to ITR Front Calipers, Mini Rotors, Hawk HPS Pads - What brake lines do I use for this?

Swapping to Integra Rear disk - I use 99-00si rear brake lines? Do they fit the integra calipers?

Also anyone know if 99-00si wheels fit over ITR calipers / 280mm rotors?

roastbeefrichie

iTrader: (1)

the front brake hoses on your car currently will work with the ITR calipers

the rear drum brake lines will be too short for the rear disc. any brake hoses from a rear disc will work

*all 88-00 & 90-01 integra (except the ITR) rear disc use a caliper stamped 7CLP13S, they share the same pad as well. although all rear discs aren't 100% identical, the calipers & brackets falling into the 7CLP13S family are all interchangeable.

99-00 civic si, 94-01 integra

The 17CL15VN ITR calipers will fit on 15" oem wheels w/ 11" rotors (ie., hammers, 99-00 Si, meshes, blades)



will you be upgrading the brake master cylinder?

Chefskinny

sorry for the late reply to this! Not sure how I missed it!

Thanks for the information!

I will be upgrading to 1" ITR Master cylinder / booster yes.

Meoshe

iTrader: (3)

The only other thing that might be an issue is the front knuckle, I think the ITR/Mini combo requires the ex/si knuckle.