cv axle removal.
#1
cv axle removal.
Hi,
I'm trying to remove the cv axle from the driver side.I'm not sure know how to remove the cv axle. theres two bolt holding the axle just below the oil filter . I'm not sure if that needs to be remove.
The reason why I'm replacing the axle is that the boot ripped and is making that clicking sound , booth turning and driving straight.
Any link to the "how to" would be awesome. I tried google but nothing comes up.
by the way the car s a 1998 honda crv.
I'm trying to remove the cv axle from the driver side.I'm not sure know how to remove the cv axle. theres two bolt holding the axle just below the oil filter . I'm not sure if that needs to be remove.
The reason why I'm replacing the axle is that the boot ripped and is making that clicking sound , booth turning and driving straight.
Any link to the "how to" would be awesome. I tried google but nothing comes up.
by the way the car s a 1998 honda crv.
#2
Honda-Tech Member
Re: cv axle removal.
2 bolts are holding the half shaft I believe and don't need to be removed. I believe the front suspension on a crv is very similar to civics and integras, so if you find a walk through on how to change an axle on a civic or integra with a b series it should be very similar.
there should be a diy in the faqs, check there first, if not google
there should be a diy in the faqs, check there first, if not google
#4
Re: cv axle removal.
#5
Honda-Tech Member
iTrader: (1)
Re: cv axle removal.
You don't need to remove those bolts unless you are trying to also pull the intermediate shaft. Sometimes the CV axle will be on there pretty good though, use a dead blow or brass hammer to try and knock it loose.
#6
Re: cv axle removal.
okay update.
Thanks for the answer i'm looking for guys . i follow all your suggestion and i did got it off.
however when i put in the new cv axle in i was not able to rotate the axle to align the spline to the spindle hub.
Thanks for the answer i'm looking for guys . i follow all your suggestion and i did got it off.
however when i put in the new cv axle in i was not able to rotate the axle to align the spline to the spindle hub.
Thread
Thread Starter
Forum
Replies
Last Post