Apexi n1 2000spec instructions
#1
Honda-Tech Member
Thread Starter
Apexi n1 2000spec instructions
Bought a set of used Apexi n1 Pro 2000 spec coilovers used. The guy didnt have the instructions anymore. Katman sent me a link for instructions on FFsquad but they are all in Kanji, Hiragana and Katakana of which I understand zero.
Apexi USA was of little help.
Does anyone have a copy of the English or Engrish instructions for this suspension. I know all the N1's are essentially the same through the different versions. Thank you.
Apexi USA was of little help.
Does anyone have a copy of the English or Engrish instructions for this suspension. I know all the N1's are essentially the same through the different versions. Thank you.
#3
Honda-Tech Member
Thread Starter
Re: Apexi n1 2000spec instructions
Here is a picture of the label.
Yes they are assembled, pillowball top hats on etc. I know how to assemble a coil over, what I am looking for are adjustment specs i.e. preload, damping, lower body height….etc.
Yes they are assembled, pillowball top hats on etc. I know how to assemble a coil over, what I am looking for are adjustment specs i.e. preload, damping, lower body height….etc.
#4
Honda-Tech Member
Re: Apexi n1 2000spec instructions
I see. Definitely technical spec sheet would help. I'll see if I can find something in the morning. It's 1:00am my time.
#6
Honda-Tech Member
Re: Apexi n1 2000spec instructions
I couldn't really find anything on these either, but I did find this.
https://honda-tech.com/forums/acura-integra-type-r-8/apexi-n1-99-spec-coilovers-how-adjust-dampening-1013460/
Hope it helps.
https://honda-tech.com/forums/acura-integra-type-r-8/apexi-n1-99-spec-coilovers-how-adjust-dampening-1013460/
Hope it helps.
#7
Honda-Tech Member
Thread Starter
Re: Apexi n1 2000spec instructions
Yeah, I have done about every variation of a search boolean on every search engine and found that thread every time.
Trending Topics
#8
Honda-Tech Member
Re: Apexi n1 2000spec instructions
From what I read, most coilover bodies like this, have 2mm per turn. I know that doesn't help much but at this point, I think it's a trial and error.
Thread
Thread Starter
Forum
Replies
Last Post
d0nkeyxPunch
Honda Civic / Del Sol (1992 - 2000)
9
03-11-2003 10:24 AM
supergreenNA1
Tech / Misc
1
04-11-2002 03:07 PM