98-02 Accord V6 Front & Rear Camber Kit!
#1
Thread Starter
Join Date: Dec 2005
Location: Belle Center, OH, USA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
98-02 Accord V6 Front & Rear Camber Kit!
http://cgi.ebay.com/ebaymotors...%3AIT
Could somebody help me with this camber kit. Details on installation are what's mostly needed/wanted.
Could somebody help me with this camber kit. Details on installation are what's mostly needed/wanted.
#3
Honda-Tech Member
Join Date: Jan 2005
Location: b00sting my D16s, SoWis, USA
Posts: 7,015
Likes: 0
Received 7 Likes
on
5 Posts
Re: 98-02 Accord V6 Front & Rear Camber Kit! (Hitesss)
Things needed: Wrenches, accord, time.
How it works:
Rear: Accords/etc use a trailing arm, a lower control arm, and two upper control arms for each rear wheel. That kit supplies the adjustable arms for the rear.
Front: Basicly all Honda cars from the 90's have a lower control arm to the frame, which is connected to a second arm or a radius arm for the bottom, a hub/knuckle in the middle, which connects to an upper A-arm via a ball joint. Make that ball joint adjustable, and you can just camber.
You'll probably have to press the old ball joint out, and use an impact gun or breaker bar to loosen the rear bolts. Fairly simple, really.
How it works:
Rear: Accords/etc use a trailing arm, a lower control arm, and two upper control arms for each rear wheel. That kit supplies the adjustable arms for the rear.
Front: Basicly all Honda cars from the 90's have a lower control arm to the frame, which is connected to a second arm or a radius arm for the bottom, a hub/knuckle in the middle, which connects to an upper A-arm via a ball joint. Make that ball joint adjustable, and you can just camber.
You'll probably have to press the old ball joint out, and use an impact gun or breaker bar to loosen the rear bolts. Fairly simple, really.
#4
Thread Starter
Join Date: Dec 2005
Location: Belle Center, OH, USA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98-02 Accord V6 Front & Rear Camber Kit! (HiProfile)
so when looking at the wheel, does it push the top out or pull the bottom in (when correcting too much negative camber)? or does it all pivot near the center?
Thread
Thread Starter
Forum
Replies
Last Post
chestnut_55
Honda Accord (1990 - 2002)
3
01-02-2006 10:04 AM
DaChoZn1
Honda Accord (1990 - 2002)
2
05-15-2005 07:57 PM
patastinky
For Sale
2
05-22-2003 10:48 PM