FS: F22A1 w/ Portflow Head Build & Parts
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2007
Location: Orange County, CA, USA
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
FS: F22A1 w/ Portflow Head Build & Parts
I've invested time & mula on this build and unfortnately I need to let it go. Change of plans for my project. Bisi @ Bisimoto Engineering helped and supply almost everything you see below. It's never been ran, it's assembled and ready to run. Great for CB7, Accord, Ek, EG, Civic swap or other.
Brief details on longblock:
F22A1 (90-93 Accord) Non-VTEC (Bored 1mm Oversize)
Arias 10.5:1 Forged piston kit
Kaizenspeed Balance Shaft eliminator kit
Portflow Head (Bisimoto spec) - ($1600+ invested)
Completely ported and polished and assembled by PORTFLOW to match Bisi's Intake gasket. It has balanced chambers, radius cut seats, contoured chambers, flowed tested 320cfm+ (intake), and more... Incl. Supertech 36mm titanium intake valves, stock exhaust, nickle/bronze seats. Valve springs are Bisi's own matching set.
More Parts:
Stage 3 cam (Bisimoto) w/Cam gear
Evolution Ind. Aluminum Flywheel
OE Honda Harmonic Balancer/pulley
Incl. gaskets, timing belt & water pump.
Other parts:
Match ported BlackTrax H23 Intake w/ various spacers
AEM H23 HiVol Fuel Rail
DC Sports Ceramic Headers 4-2-1
I have well over $4k invested in parts above. Make me a reasonable and it's all yours.
CALL OR TEXT KEN: 949.357.8415
Brief details on longblock:
F22A1 (90-93 Accord) Non-VTEC (Bored 1mm Oversize)
Arias 10.5:1 Forged piston kit
Kaizenspeed Balance Shaft eliminator kit
Portflow Head (Bisimoto spec) - ($1600+ invested)
Completely ported and polished and assembled by PORTFLOW to match Bisi's Intake gasket. It has balanced chambers, radius cut seats, contoured chambers, flowed tested 320cfm+ (intake), and more... Incl. Supertech 36mm titanium intake valves, stock exhaust, nickle/bronze seats. Valve springs are Bisi's own matching set.
More Parts:
Stage 3 cam (Bisimoto) w/Cam gear
Evolution Ind. Aluminum Flywheel
OE Honda Harmonic Balancer/pulley
Incl. gaskets, timing belt & water pump.
Other parts:
Match ported BlackTrax H23 Intake w/ various spacers
AEM H23 HiVol Fuel Rail
DC Sports Ceramic Headers 4-2-1
I have well over $4k invested in parts above. Make me a reasonable and it's all yours.
CALL OR TEXT KEN: 949.357.8415
Last edited by NASOHC; 03-24-2009 at 04:19 PM.
#6
B*a*n*n*e*d
Join Date: Mar 2007
Location: Torrance, CA
Posts: 3,834
Likes: 0
Received 0 Likes
on
0 Posts
#7
Honda-Tech Member
Thread Starter
Join Date: Jun 2007
Location: Orange County, CA, USA
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: F22A1 w/ Portflow Head Build & Parts
It's already installed on motor.
See top. Power goal for this was well over 200whp. In a Civic - fast!
FYI: BlackTrax H23 intake & AEM fuel rail along with RC injectors have been sold. I'd like to get $2000 firm for the complete longblock pictured above minus headers and intake of course. Crankshaft was balanced using parts listed above as well which are included.
FYI: BlackTrax H23 intake & AEM fuel rail along with RC injectors have been sold. I'd like to get $2000 firm for the complete longblock pictured above minus headers and intake of course. Crankshaft was balanced using parts listed above as well which are included.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
hondapimp125
Classifieds: Forced Induction
5
07-19-2010 10:14 AM