You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today!
I need to add an emanage to a crx which was an obd0 ecu (pwo) ,now i buy an adapter harness obd0 to obd1 and now i uses a japan specs ecu a P30 car runs great but i want to add a GREDDY EMANAGE .Can someone help me wire in this also the ignition harness that i buy with the unit?
I forget to say that it is happily running with 10psi .Solid deck B16a with all the internals change :je pistons carillo rods etc.. So help guys even with pictures and P30 pinouts.
9.74 @ 149MPH GM Cobalt (World's Best Cobalt) Wasn't me!! HCI said it
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.