|
Sign in using an external account
|
|
||||||||
| Welcome to Honda-Tech! | ||
|
|
Welcome to Honda-Tech.com.
You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today! |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Honda-Tech Member
Garage is empty, add now
|
did a engine swap into a 96 civic using the dx civic harness, the motor is a acura cl f23a1 same as a accord motor, do i have to wire in the resistor box so i can run the injectors? i got dsm 450cc injectors going in later on when i get my maniolf in for the turbo but until thendo i have to have the resistor to run the factory injectors or will my chipped p28 run them??????????????????
__________________
96 civic 4dr h22 Borg turbo http://www.cardomain.com/ride/729844/6 95 civic ej2 f23 37r turbo http://www.cardomain.com/ride/729844/9 |
|
|
|
|
|
#2 |
|
Honda-Tech Member
Garage is empty, add now
|
bump
__________________
96 civic 4dr h22 Borg turbo http://www.cardomain.com/ride/729844/6 95 civic ej2 f23 37r turbo http://www.cardomain.com/ride/729844/9 |
|
|
|
![]() |
|
|
| Tags |
| 95, accord, acura, box, civic, cl, ek, engine, f23, factory, h23, injector, injectors, resistor, swap, turbo, wiring |
| Thread Tools | Search this Thread |
|
|