ghetto exhaust!
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2001
Location: somewhere, in, nj
Posts: 1,106
Likes: 0
Received 0 Likes
on
0 Posts
ghetto exhaust!
ok...i know im gonna get flamed hard core for this but...will an aluminum can withstand exhaust heat? my flange from my header to my exhaust broke and i want a temp fix so i can drive aorund without cops pulling me over...well at least till payday...cuz i drive around alot...thanx
#2
Honda-Tech Member
Join Date: Apr 2001
Location: NY, USA
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Re: ghetto exhaust! (hydroflip)
Are you thinking of a soda can and two hose clamps?
I've done it with steel sheet metal. The aluminum won't melt, but the vibration might break it.
[Modified by Gasoline Fumes, 7:41 AM 11/30/2001]
I've done it with steel sheet metal. The aluminum won't melt, but the vibration might break it.
[Modified by Gasoline Fumes, 7:41 AM 11/30/2001]
#4
Re: ghetto exhaust! (hydroflip)
ditto - i dont think like an aluminium can would work, but if you split a coffe can, wrap it around there once or twice and put some u-bolts around it itd prolly work decently well...
Thread
Thread Starter
Forum
Replies
Last Post