Can i use stock valves???
09-18-2004, 03:59 PM
#1
Thread Starter
Join Date: Jan 2004
Location: Boston, ma, United States
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Can i use stock valves with....
I am planning on putting a Ls head together with Crower 404's and Crower Valvesprings and retainers but i was wondering can i use stock valves or should i just upgrade to aftermarket valves.
Modified by LsBack at 1:21 AM 9/19/2004
Modified by LsBack at 1:21 AM 9/19/2004
09-18-2004, 04:42 PM
#2
Honda-Tech Member
Join Date: Jan 2002
Location: Boise, ID
Posts: 2,466
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can i use stock valves with.... (LsBack)
Stock valves will be fine as long as they are in good shape. I would at least get a valve job done though. Aftermarket valves can net more power but the difference would be minimal. It's all in the valve job.
09-19-2004, 11:25 AM
#4
Honda-Tech Member
Re: Can i use stock valves with.... (LsBack)
yea no need to replace ur valves. i just installed CROWER 403 cams in my car with crowe valve springs and retainers. no need for new valves
09-19-2004, 01:04 PM
#5
Swollen Member
Join Date: Jan 2003
Location: Highland, MD, USA
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
Re: Can i use stock valves with.... (boosted k20)
what about the fact of the valves now traveling farther with the new lift of the cam. I have heard that the stockers get polished in the area of the valve seals where they traveled before, and the could possible leak after that.
Thread
Thread Starter
Forum
Replies
Last Post
turboman2.2
All Motor / Naturally Aspirated
1
07-04-2010 10:08 AM
