How do I wire in power door locks?
02-15-2004, 07:44 AM
#1
Thread Starter
Join Date: Nov 2003
Location: phila, pa, usa
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
I got a good question! and i need help! please!
Ok i just got a integra for a great deal and i needed to buy new doors for the car so i did! now the integra i got was a 95 RS no power doors locks 
so ok i got new doors off a 00 GSR so my questions how do i wire in the power door locks? like there is fuse for it and i changed it and all but i still dont have power locks is it b/c its not wired into the door or is it b/c i just dont have it. i dont know but i need help please!
so ok i got new doors off a 00 GSR so my questions how do i wire in the power door locks? like there is fuse for it and i changed it and all but i still dont have power locks is it b/c its not wired into the door or is it b/c i just dont have it. i dont know but i need help please!
02-15-2004, 11:04 AM
#2
Senior Member
Find a helms manual and check the wiring diagrams. Not a lot of people try and do what you're doing, so naturally there isn't a lot of feedback about it.
02-15-2004, 04:59 PM
#7
Member
Join Date: Dec 2001
Location: San Francisco, CA, United States
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
Re: I got a good question! and i need help! please! (97gSrkId88)
Are you looking to sell your RS door bezels?? If you have a set of tan bezels to sell let me know.
Trending Topics
02-15-2004, 06:25 PM
#8
Re: I got a good question! and i need help! please! (timmy8151)
check to see if your getting power to that fuse. get a test light. take the door panel and check to see if your getting power to the switch. bypass the switch with +12 to see if it works. im not sure what exactly is wired in for the door locks but that will should get you familiar when you start digging around to see what you need. check the old door connections with the new door. did you have power mirrors with the old door? did you even connect any harnesses with the door? or did you just bolt it right in? look in the repair manual for wire colors and follow the colors for the door lock. they should come prewired however even tho your cars not supposed to have them.
02-15-2004, 09:57 PM
#9
Thread Starter
Join Date: Nov 2003
Location: phila, pa, usa
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Ya i hooked everything up right. i will test them though, i did think of that but i didnt do it yet. and i would think that its prewired also but i dont know. thanks for all teh feedback everyone!
03-06-2004, 02:17 PM
#12
Honda-Tech Member
Join Date: Sep 2002
Location: Beavercreek, OH 45431
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
Re: (DriveSideWays)
Bringing this thread back from the dead, I have run into a similar problem. A friend bought a civic EX door to replace a door on his DX. Is it possible to wire it up? I'd assume it would just be a set of power wires, right?
How did the project end up going for you?
How did the project end up going for you?
Thread
Thread Starter
Forum
Replies
Last Post