rc 550 question
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Posts: 7,056
Likes: 0
Received 0 Likes
on
0 Posts
rc 550 question
i wasnt sure how far the rubber o-rings go up on the injector, do they go all the way up as far as they can or do they kinda stay lower? and also, its a b16a2, do i need to take those fuel rail spacers that are on the 3 studs that the rail goes on? cause my injectors arent going in all the way and im not sure if its the o-rings or if im suppose to take those spacers out? thanks guys
#4
Honda-Tech Member
iTrader: (1)
Put the o rings in the manifold. Put the injectors in the rail. Line the rail/injectors up with the holes on the manifold. Tighten the rail slowly, checking how the o rings are doing often. They should seat, especially with a little lubrication, but it will be a tight fit.
Thread
Thread Starter
Forum
Replies
Last Post