are b18c5 bottom end components compatible in a ls block?
11-20-2003, 10:37 AM
#1
Member
Thread Starter
Join Date: Feb 2002
Location: Southern California, 562, United States
Posts: 1,030
Likes: 0
Received 0 Likes
on
0 Posts
are b18c5 bottom end components compatible in a ls block?
i have a complete bottom end from a b18c5...all the parts..crank , rods, pistons, oil pan etc...i was wondering if it'll fit in a ls block, and if it would b good for ls/vtec...lmk ..any help is greatly appreciated..thanks
the reason for this is bcuz, i bought a block off ebay , and it came up hot....
the reason for this is bcuz, i bought a block off ebay , and it came up hot....
12-03-2003, 11:02 AM
#2
Join Date: Jun 2003
Location: southside, NJ
Posts: 6,319
Likes: 0
Received 0 Likes
on
0 Posts
i dont think its possible unless you sleeve the block and get the same size bore pistons, i know they are different tho, only by a little but they wont work, unless you might be able to swap out the sleeves, but i dont know if that works.
12-03-2003, 04:47 PM
#3
Honda-Tech Member
Join Date: Mar 2002
Location: Southern California, U.S.A.
Posts: 9,854
Likes: 0
Received 3 Likes
on
3 Posts
Re: are b18c5 bottom end components compatible in a ls block? (vtec 5 6 2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtec 5 6 2 »</TD></TR><TR><TD CLASS="quote">the reason for this is bcuz, i bought a block off ebay , and it came up hot.... </TD></TR></TABLE>
Why don't you tell the police about the block so that they can trace the block back to the thieves who stole it. One less band of thieves out there stealing people's ITR's.
</TD></TR></TABLE>Why don't you tell the police about the block so that they can trace the block back to the thieves who stole it. One less band of thieves out there stealing people's ITR's.
12-03-2003, 04:54 PM
#4
Join Date: Oct 2003
Location: Anywhere, USA
Posts: 862
Likes: 0
Received 0 Likes
on
0 Posts
Re: are b18c5 bottom end components compatible in a ls block? (b19coupe)
yes the crank, rods, pistons will all fit...oil pump main seal ect...but it will not be an ls v-tec you will have the R stroke not an ls it will be like having a R block with no oil squirters and no main girdle...
12-03-2003, 04:56 PM
#5
Join Date: Oct 2003
Location: Anywhere, USA
Posts: 862
Likes: 0
Received 0 Likes
on
0 Posts
Re: are b18c5 bottom end components compatible in a ls block? (b19coupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b19coupe »</TD></TR><TR><TD CLASS="quote">
Why don't you tell the police about the block so that they can trace the block back to the thieves who stole it. One less band of thieves out there stealing people's ITR's. </TD></TR></TABLE>
He could also get in trouble for having the block...he has the stolen property in his possession....
Why don't you tell the police about the block so that they can trace the block back to the thieves who stole it. One less band of thieves out there stealing people's ITR's. </TD></TR></TABLE>
He could also get in trouble for having the block...he has the stolen property in his possession....
12-03-2003, 09:07 PM
#6
a/k/a Jomo
Join Date: Jan 2002
Posts: 6,275
Likes: 0
Received 0 Likes
on
0 Posts
Re: (lsintegra95)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lsintegra95 »</TD></TR><TR><TD CLASS="quote">i dont think its possible unless you sleeve the block and get the same size bore pistons, i know they are different tho, only by a little but they wont work, unless you might be able to swap out the sleeves, but i dont know if that works.</TD></TR></TABLE>
This is actually completley false. Just listen to the later comments.
This is actually completley false. Just listen to the later comments.
12-03-2003, 09:18 PM
#7
Join Date: Oct 2003
Location: Anywhere, USA
Posts: 862
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Mr Milano)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr Milano »</TD></TR><TR><TD CLASS="quote">
This is actually completley false. Just listen to the later comments.</TD></TR></TABLE>
This is actually completley false. Just listen to the later comments.</TD></TR></TABLE>
Trending Topics
12-04-2003, 07:22 PM
#9
Join Date: Oct 2003
Location: Anywhere, USA
Posts: 862
Likes: 0
Received 0 Likes
on
0 Posts
Re: (1797ccs)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1797ccs »</TD></TR><TR><TD CLASS="quote">no they wont fit...sell me the parts!!!</TD></TR></TABLE>
WTF? yeah they will fit for sure
WTF? yeah they will fit for sure
Thread
Thread Starter
Forum
Replies
Last Post
