14mm hub/rotor assembly bolts 1996 Accord
#1
14mm hub/rotor assembly bolts 1996 Accord
New to the forum. Hello Everyone. I have a 1996 Accord. I'm trying to find a couple of replacement bolts for the front rotors/hub assembly (there are four of them) and can't seem to get any help from the auto parts stores. They are the 14mm bolts of the hub assembly that fasten the hub to the rotor. I bought new rotors and brake pads and planned on replacing everything, but I couldn't get two of those four bolts out. Needless to say I completely ruined a couple of them and need replacements. Does anyone know the part number or specs or possibly where I can get a couple of these bolts? Like I said: they are 14mm hex head bolts and there are a total of four on each front hub/rotor. I thought an auto parts place would have the info, but I have called several and they don't seem to know what I'm talking about. The car is a 1996 Honda Accord. It's the very basic model....2.2 four cylinder engine. And again....the bolts are NOT the screw head looking countersink type. They are the 14mm hex head bolts. Can anyone help? Thanks. Chuck
#4
Honda-Tech Member
Re: 14mm hub/rotor assembly bolts 1996 Accord
If it's like my local jy's they're low on accords - I would suggest finding the part no. On a honda parts Website like majestichonda.com and shopping the Internet by the part number...
#6
Honda-Tech Member
Re: 14mm hub/rotor assembly bolts 1996 Accord
Take one of the bolts with you to the auto parts store. They sell bolts, in a rotating end cap display. Just match the thread pitch and the bolt diameter. Easiest way is to find a nut that fits your bolt...then buy a bolt that the same nut fits. Get the same or close to the same length.
Trending Topics
#9
Thread
Thread Starter
Forum
Replies
Last Post
dbbyleo
Honda Accord & Crosstour (2003 - 2012)
9
09-21-2008 12:49 PM