10cjennings

iTrader: (1)

I tore one of the boots on a recently installed front lower ball joint.

I'm going to replace the boot, but I'm looking at this parts diagram and I'm not sure what the part # is for the clip that holds the boot to the ball joint.

NOT the circlip which secures the balljoint to the knuckle.

It looks to me like it is #10 on this diagram but I'm not sure and don't want to wait a week for the parts to arrive for them to be wrong. Any help is appreciated.

#10 = 52338-SL0-003
#20 = 90653-SB0-000

10cjennings

iTrader: (1)

10cjennings

iTrader: (1)

Fixed the picture.

10cjennings

iTrader: (1)

Nobody's replaced a boot and used the OEM parts?

mimog3

It Should Be #10 from the looks of it. I have done it before and its not too hard. what happened to the circlip before? I know i reused mine when i did it.

10cjennings

iTrader: (1)

I thought it was #10 too, and that I should be able to reuse the old ones but it sucks not getting the car back together because you broke the $2 clip and didn't order another one. I ordered both just to be sure.