Stupid question
#3
Honda-Tech Member
Re: Stupid question
it will if it's an H23A1. intake and exhaust manifolds are direct swaps onto the F22Ax motors.
the manifolds from VTEC equipped H-series motors (H22 and H23 VTEC) will not line up.
the manifolds from VTEC equipped H-series motors (H22 and H23 VTEC) will not line up.
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2014
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Re: Stupid question
Thanks Hondamark35... Turbo Exhaust Manifold - H22 - Mandrel Bend T304 POLISHED Stainless Steel - Thick Flanges - T3/T4 Reenforced Turbo Mounting Flange - features Wastegate Mounting Flange - - includes gaskets, wastegate block-off plate and hardware.
NOPI part# 228+0135
Also On turbo im going with a Godspeed Universal T3t4 Turbo Charger .63ar
NOPI part# 228+0135
Also On turbo im going with a Godspeed Universal T3t4 Turbo Charger .63ar
Last edited by TheRookie74; 09-02-2014 at 08:58 AM.
#5
Honda-Tech Member
Re: Stupid question
Thanks Hondamark35... Turbo Exhaust Manifold - H22 - Mandrel Bend T304 POLISHED Stainless Steel - Thick Flanges - T3/T4 Reenforced Turbo Mounting Flange - features Wastegate Mounting Flange - - includes gaskets, wastegate block-off plate and hardware.
NOPI part# 228+0135
Also On turbo im going with a Godspeed Universal T3t4 Turbo Charger .63ar
NOPI part# 228+0135
Also On turbo im going with a Godspeed Universal T3t4 Turbo Charger .63ar
http://www.ebay.com/itm/Polish-Stainless-T3-Turbo-Manifold-Exhuast-For-92-96-Prelude-Si-95-SE-BB2-H23A1-/390841517769?pt=Motors_Car_Truck_Parts_Accessories&hash=item5afff846c9&vxp=mtr but specifies H23A1
Thread
Thread Starter
Forum
Replies
Last Post