Steeve_Civic

Do you recommand to use clutch for shifting on dogbox?
I ve just bought a GForce and want to drive it.
Thank you for your advise

tofast4uh22

If you don't use the clutch you will need to use a ignition cut of some sort. Strain gauge or something

tepid1

With a properly setup ignition cut there is less chance of dog damage vs. clutching the car.

locash

I'd bet that using the clutch is a lot safer for the dogs.

Zer0_SpeedWorks

iTrader: (1)

I still clutch mine a little bit... I have a clutch switch setup for power interrupt...

rudebwoy

iTrader: (1)

I was wondering if using the FTS full throttle shift option with the s300 will work with a strain gauge or just keep it pedal activated.

2000CTRSi

Bow wow ign cut jam it in

Turbo-LS

iTrader: (4)

Pretty sure hondata ditched the strain gauge option on the s300.

Steeve_Civic

Will try both for next race

rudebwoy

iTrader: (1)

I just noticed that.

Steeve_Civic

Asked GForce about clutch or not but no answer yet

bhawan133

I personally recommend to use the clutch if you are not using a strain gauge or some kind of shift cut.

.adam.

can anyone verify this?

Turbo-LS

iTrader: (4)

You can verify it. Open the software and its no longer there.

Andrew1706

Well that's pretty ****, would be pretty pissed off if it's been removed to allow the pointless V3 additions or that traction control abortion.

.adam.

dammit. don't have the software on my mac so i couldn't. I wonder why they got rid of it. did anyone have issues using a strain setup with hondata?

Turbo-LS

iTrader: (4)

Its been gone for several updates now. It probably didnt work worth a **** so they ditched it. I still cant get my Full Throttle shift to work worth a damn so I just dont bother. Looking forward to making the move to AEM v2