April FS Thread
04-01-2014, 08:17 AM
#1
Moderator
Thread Starter
April FS Thread
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
04-01-2014, 12:16 PM
#3
Honda-Tech Member
Join Date: Oct 2007
Location: miami, fl
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
selling my SFWD integra RS shell that I'm not gona use anymore .this car is ready to go just needs a swap and ur good....car was previously featured in Tunerzine magazine ...this car was since repainted with PPG super sonic gsr blue and fitted with a JDM exospeed wide body front..also has a certified mazworx cage/window net etc .stroud parachute.brake booster delete master cylinder,shaved bay.skunk2 Pro c suspension with custom spring rates, full-race traction bars with custom front tubular frame front to assist the wide body and 60pounds on the nose of the car. custom catch pan for underneath the motor, DSS 5.9 hubs, ARP wheel studs all around an skunk2 lug nuts , slotted rotors and pads.really hate to get rid of it but not practical for me to build at the moment..price is $6500....if interested u can reach me at 305 281 6495 ryan...
http://www.tunerzine.com/view-articl...ce-dc2-feature
Weld wheels are sold!
http://www.tunerzine.com/view-articl...ce-dc2-feature
Weld wheels are sold!
Last edited by acrite1999; 04-01-2014 at 06:32 PM.
04-01-2014, 03:37 PM
#4
Re: April FS Thread
Moroso catch can with all fittings clamp lines and block fittings (was used for ventilation behind the block) - 120
Greddy catch can made to have filter and to use -10AN lines use on my valve cover - 60 OBO
T3/T4 Turbo needs new oil seal - 60 OBO
Hallman Pro Manual boost controller in RED - 50
Stock GSR intake manifold - 20 picked up
Autometer Oil pressure gauge with lines and all necessary sending units/sensors - 40
Meziere Water pump setup for B series - 250
A pair of M&H 24x3.6x15 skinnies tires still a lot of tread left - 230 OBO
Greddy catch can made to have filter and to use -10AN lines use on my valve cover - 60 OBO
T3/T4 Turbo needs new oil seal - 60 OBO
Hallman Pro Manual boost controller in RED - 50
Stock GSR intake manifold - 20 picked up
Autometer Oil pressure gauge with lines and all necessary sending units/sensors - 40
Meziere Water pump setup for B series - 250
A pair of M&H 24x3.6x15 skinnies tires still a lot of tread left - 230 OBO
Last edited by 98B18C1; 04-01-2014 at 04:16 PM.
04-01-2014, 05:18 PM
#6
Honda-Tech Member
Re: April FS Thread
FS: RPM Services 76mm throttle body. SOLD
FS: ~1.75 gallon fuel cell. Mounts in the OEM battery/fuse box location. Comes with a -12 feed, -8 return, vent and billet fill cap.
Price = $200 shipped in the states
FS: 5 gallon aluminum fuel cell. Mounts in the factory location and bolts to the chassis so no straps are required. Comes with two -8 or -10 feed fittings and -8 or -6 return.
Price = $375 shipped in the states
FS: ~1.75 gallon fuel cell. Mounts in the OEM battery/fuse box location. Comes with a -12 feed, -8 return, vent and billet fill cap.
Price = $200 shipped in the states
FS: 5 gallon aluminum fuel cell. Mounts in the factory location and bolts to the chassis so no straps are required. Comes with two -8 or -10 feed fittings and -8 or -6 return.
Price = $375 shipped in the states
Last edited by Blown90hatcH; 05-02-2014 at 12:38 PM.
04-01-2014, 06:18 PM
#7
Honda-Tech Member
Join Date: Nov 2007
Location: bronx, ny, usa
Posts: 1,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
brand new honda dart block b18 asking 4500 with extras..spent 6k on block alone
bored out to 84mm with 89mm crank
cp pistons 9:1 compression and upgraded wrist pins
manley turbo tuff rods with upgraded +625 bolts
ls crank balanced and micro polished
extras..moroso aluminum oil pan bnib, race damper,itr oil pump bnib and few brackets and bolts.. in total spent over 8k in all asking 4500
txt only 646 372 1764...please don't waste my time very busy..parts located in rhode island..i live in nyc
4 inch aluminum exhaust with burn stainless muffler asking 650 custom for ek hatch fits perfect
bored out to 84mm with 89mm crank
cp pistons 9:1 compression and upgraded wrist pins
manley turbo tuff rods with upgraded +625 bolts
ls crank balanced and micro polished
extras..moroso aluminum oil pan bnib, race damper,itr oil pump bnib and few brackets and bolts.. in total spent over 8k in all asking 4500
txt only 646 372 1764...please don't waste my time very busy..parts located in rhode island..i live in nyc
4 inch aluminum exhaust with burn stainless muffler asking 650 custom for ek hatch fits perfect
Trending Topics
04-01-2014, 08:41 PM
#8
Honda-Tech Member
Join Date: Nov 2006
Location: cincy, oh, USA
Posts: 584
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
FS: B series skunk2 pro series Titanium adjustable cam gears. $150.00 + paypal fees. FREE shipping. 513 503 4787 Greg
Last edited by grjp1988; 04-16-2014 at 08:36 AM.
04-02-2014, 07:55 AM
#10
Honda-Tech Member
Join Date: Dec 2008
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
Wavetrac B16/LS Pro Level differential for sale. No dyno time, 3 passes $1000 shipped to the lower 48 states. Nothing wrong with it, switching to a PPG so we need a GSR diff. Pm me for more pictures and info.
04-02-2014, 09:02 AM
#11
Honda-Tech Member
Join Date: Dec 2006
Location: SLX, IA, USA
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
BNIB, never installed PLM B-series Header = $250 obo
MSD Digital 6 Plus with HVC-II Coil and Tach Adapter = $250 obo
G-Force SFI 16.1 6point Harness (25 passes) = $60 obo
G-Force SFI 27.1 Window Net = $20
TIAL BOV (Blue) - used for 25 -30 passes and 20 or so dyno runs. $175 obo
MSD Digital 6 Plus with HVC-II Coil and Tach Adapter = $250 obo
G-Force SFI 16.1 6point Harness (25 passes) = $60 obo
G-Force SFI 27.1 Window Net = $20
TIAL BOV (Blue) - used for 25 -30 passes and 20 or so dyno runs. $175 obo
04-02-2014, 04:53 PM
#12
Re: April FS Thread
Parts are still on the car, will removed within a day of sale, shipping across USA would be 2-4 day shipping from me to anywhere in the 48 states. PAYPAL ONLY.
PM ME FOR PAYMENT INSTRUCTIONS
AFI Manifold, Custom speced, Tapered runners, 3.7-4.0 Liter Plenum. GSR Head. Paid 1200+, Asking 950 shipped. Worked great on my NA car, and worked great with the nitrous, in my development I need to test other things so this goes.
Custom Myers header, Original was a street header, Modified by Dave Fry @ Round2Motor sports, was mild steel, rusted, cleaned up and painted. I was one of THE first to have one of his headers and it has served me well, getting rid of it because I'm testing other products, 750 + Shipping.
PM ME FOR PAYMENT INSTRUCTIONS
AFI Manifold, Custom speced, Tapered runners, 3.7-4.0 Liter Plenum. GSR Head. Paid 1200+, Asking 950 shipped. Worked great on my NA car, and worked great with the nitrous, in my development I need to test other things so this goes.
Custom Myers header, Original was a street header, Modified by Dave Fry @ Round2Motor sports, was mild steel, rusted, cleaned up and painted. I was one of THE first to have one of his headers and it has served me well, getting rid of it because I'm testing other products, 750 + Shipping.
04-02-2014, 05:55 PM
#13
Honda-Tech Member
Join Date: May 2004
Location: clinton, ms, usa
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
This is for a d16y8
I have the following
d16y8 head complete with brian crower springs, compcams59300 camshaft
d16y8 Intake Manifold and fuel Rail
d-series SPA topmount turbo manifold
Complete head with intake shipped to 48states $400
may part out if enough interested
SPA Manifold $300 or best offer
I have the following
d16y8 head complete with brian crower springs, compcams59300 camshaft
d16y8 Intake Manifold and fuel Rail
d-series SPA topmount turbo manifold
Complete head with intake shipped to 48states $400
may part out if enough interested
SPA Manifold $300 or best offer
04-02-2014, 06:17 PM
#14
Honda-Tech Member
Join Date: Apr 2007
Location: dfw, tx, usa
Posts: 978
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
Albins gear set, same set used in speed factorys 7sec world record holding B series drag car , with or without quaife like new less than a dozen passes already assembled ready to drop into case and run, all new bearings shims, No assembly required No wait time ready to go 4.09 final $7100 complete $6600 no quaife
04-03-2014, 01:57 AM
#15
Honda-Tech Member
Join Date: Jun 2002
Location: Florida, us
Posts: 2,105
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
FS: Used SLS T4 Divided Top Mount w 4'' DP & Dump Pipe Koyo Rad
I have for sale is a used SLS Twinscroll T4 Divided Top Mount with 4'' DP. Manifold and DP are in great condition no cracks no dents. Dump tubes will be included. Car made 800 WHP with this Manifold. Tial MVS 38 mm Wastegates are not for sale, but I can included both Tial Wastegates for 200 each and they will come with all needed hardware. 15 PSI springs in each.
Also have a used Koyo dual core Rad for 92-00 Civic no leaks fan not included. Asking 100 shipped.
Manifold w DP Dumptube $1200 Shipped
Manifold w DP Dumptube Tial 38 mm MVS Wastegates $1400 Shipped.
Koyo Rad $100 shipped
Located Palm Bay FL
I have for sale is a used SLS Twinscroll T4 Divided Top Mount with 4'' DP. Manifold and DP are in great condition no cracks no dents. Dump tubes will be included. Car made 800 WHP with this Manifold. Tial MVS 38 mm Wastegates are not for sale, but I can included both Tial Wastegates for 200 each and they will come with all needed hardware. 15 PSI springs in each.
Also have a used Koyo dual core Rad for 92-00 Civic no leaks fan not included. Asking 100 shipped.
Manifold w DP Dumptube $1200 Shipped
Manifold w DP Dumptube Tial 38 mm MVS Wastegates $1400 Shipped.
Koyo Rad $100 shipped
Located Palm Bay FL
04-03-2014, 05:19 AM
#16
Honda-Tech Member
Re: April FS Thread
All prices are + shipping and paypal fees.
Rolling shell-$10k non neg price! Don't ask! This is a crackhead price! 25.5 cert chassis, Progress custom coil over setup, custom front, shaved bay, custom flat paint by Goolsby customs, fiberglass tailgate, CCC spoiler, carbon hood, weld ...rear skinny's, Exospeed 15x9 fronts with 26x9 toyo's, Kirky seat, stroud window net, custom staging brake, stroud parachute, sumped tank, Mfactory LCA, and I don't know what else I'm forgetting. I also have enough carbon wrap to do the hood, tailgate, and rear diffusers. I will do that before it leaves here.
Chase Bays b series mil spec harness-$1000
Used Golden eagle B series head studs-$90
Used oversized flat bottom valves. sold
UPR billet intercooler water tank lid-SOLD
New Honda engine bearings-$125
There are 26 bearings in there. Probably $250 worth.
15 used Crower valve spring retainers. 1 missing for some reason.-$75
New MSD distributor cap for b series-SOLD
MSD HVC 2 coils. all but the blue one sold -$100
AEM fuel rail for b series with sample valve and SX regulator-$150
PWR radiator w/Spal fan for 92-95 civic-$150
Turbo smart 40mm wastegate-sold
Hks bov-$50
Unknown intercooler-$50
OG B series Spec twin disc clutch-SOLD
Intercooler water tank-$50
F22 drag turbo manifold-$50
B18C1 CNC race head for sale. This head was used in the BRE Hot Rod car, but has been reworked with a new valve job from CNC. It's all done, just needs to be professionally assembled. I know I would prefer it this way so everything can be confirmed to be correct during assembly. Valves, springs, and retainers are Ferrea. Comes with keepers, shims, and seal. All cam caps and oil rails included too. SOLD
Xenocron b series cam degree kit. SOLD
JG Edelbrock intake for B18c1 sold
BDL 70mm throttle body-$200
Weldon 2025 fuel pump with fresh rebuild from Weldon. Filters included-SOLD
MSD 75314 4cyl ignition box w traction control-$600
Stock B18C1 longblock, new cam seals, rear main seal, oil pan gasket, valve cover gasket, oil pump, water pump, tensioner, and timing belt. Was gonna be my beater engine, do it's got everything you need new to mske it run for a long time. $1250 timing belt and cover not in pic. also, will have stock oil pan and pickup installed.
Rolling shell-$10k non neg price! Don't ask! This is a crackhead price! 25.5 cert chassis, Progress custom coil over setup, custom front, shaved bay, custom flat paint by Goolsby customs, fiberglass tailgate, CCC spoiler, carbon hood, weld ...rear skinny's, Exospeed 15x9 fronts with 26x9 toyo's, Kirky seat, stroud window net, custom staging brake, stroud parachute, sumped tank, Mfactory LCA, and I don't know what else I'm forgetting. I also have enough carbon wrap to do the hood, tailgate, and rear diffusers. I will do that before it leaves here.
Chase Bays b series mil spec harness-$1000
Used Golden eagle B series head studs-$90
Used oversized flat bottom valves. sold
UPR billet intercooler water tank lid-SOLD
New Honda engine bearings-$125
There are 26 bearings in there. Probably $250 worth.
15 used Crower valve spring retainers. 1 missing for some reason.-$75
New MSD distributor cap for b series-SOLD
MSD HVC 2 coils. all but the blue one sold -$100
AEM fuel rail for b series with sample valve and SX regulator-$150
PWR radiator w/Spal fan for 92-95 civic-$150
Turbo smart 40mm wastegate-sold
Hks bov-$50
Unknown intercooler-$50
OG B series Spec twin disc clutch-SOLD
Intercooler water tank-$50
F22 drag turbo manifold-$50
B18C1 CNC race head for sale. This head was used in the BRE Hot Rod car, but has been reworked with a new valve job from CNC. It's all done, just needs to be professionally assembled. I know I would prefer it this way so everything can be confirmed to be correct during assembly. Valves, springs, and retainers are Ferrea. Comes with keepers, shims, and seal. All cam caps and oil rails included too. SOLD
Xenocron b series cam degree kit. SOLD
JG Edelbrock intake for B18c1 sold
BDL 70mm throttle body-$200
Weldon 2025 fuel pump with fresh rebuild from Weldon. Filters included-SOLD
MSD 75314 4cyl ignition box w traction control-$600
Stock B18C1 longblock, new cam seals, rear main seal, oil pan gasket, valve cover gasket, oil pump, water pump, tensioner, and timing belt. Was gonna be my beater engine, do it's got everything you need new to mske it run for a long time. $1250 timing belt and cover not in pic. also, will have stock oil pan and pickup installed.
04-03-2014, 01:22 PM
#17
Honda-Tech Member
Join Date: Sep 2006
Location: Albuquerque, NM
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
Well i have put 3k miles on this car in about 3 years and have about 2500-2700 miles on this drivetrain. i dont drive the car and dont have time to race the car.
okay here is a list of parts from the car. If i sell the motor i will part the car out. if you have interest in anything pm me and we can talk about it.
my car makes 384 hp at the wheels on 9 psi of boost from a t3/t4 .57 trim garret journal bearing cast wheel turbo. on 22 psi on same turbo the car makes 456 hp and 380 ft lbs of torque at the wheels. highest it made on this setup is 491 hp and 408 tq at the wheels and then we turned it down some
i have ran the car at the drag strip 4 times best time of 11.750 at 120 on 22 psi spinning a lot in first. backed up with an 11.80 at 118.
EVERTTHING IN THE DRIVETRAIN HAS 2,700 MILES ON IT
EVERYTHING IS OBO send me a pm if interested in anything.
LASKEY RACE MOTOR
-Benson sleeved block
-Benson balanced and micropolished crank
-CP pistons and rings
-Pauter rods
-ACL Bearings
-OEM (TypeR) oil pump
-Lower gasket set
-Blueprint and assembly
-ATI harmonic balancer
-Moroso oil pan with two bungs for the turbo oil return
-ARP head studs
-type r water pump
-oem honda head gasket
-OEM timing belt
for sale for 3,500
TOP END
FOR THE HEAD
STAGE 3 FROM PORT FLOW INCLUDING
PortFlow port & polish, SuperTech Stainless Steel nitride coated valves, dual valve springs, titanium retainers, competition 3 angle valve job, surfaced to a mirror like finish and assembly
-has inconel exhaust valves
-tuner 1 cams
-BDL adjustable cam gears
-BDL cam seal
-AEM fuel rail
-BDL throttle body port matched to intake manifold
-Edelbroke victor x intake manifold
-omni 4 bar map sensor
-precision 1000cc injectors
-studs for the exhaust and intake manifold instead of bolts
for sale for 3,000
sale the motor without distributor or valve cover for 6,000
CATCH CAN KIT
T1 catch can kit with lines, bungs, etc
valve cover with bungs welded on
powder coating valve cover
for sale for 600
radiator
for sale for - 150
AFI TURBO KIT
for sale for 2000
GSR TRANSMISSION
mfactory carbon lined synchros
mfactory helical lsd
mfactory 4.05 final drive
Competetion Clutch stage 5 with an upgraded pressure plate
ACT 12.5 lb chromoly flywheel
For sale for – 2,000
AXLES
driveshaft shop 5.9 with ABS rings
for sale for - 1400
IGNITION
Coil on plug setup with k series coils and coil plate
for sale for - 500
Aeromotive fuel pressure regulator – 100
SUSPENSION
Koni yellow shocks with ground control coil overs – has 200 miles on them
For sale for - 750
ECU with hondata s300 and boost kit
For sale for - 500
exhaust 3" thermal turbo exhaust
for sale for - 500
greddy turbo timer - 100
hasport motor mounts
for sale for - 250
24.5x9x13 MT et drag slicks with V2 Competition Weels, 13x8,
4x100, +20mm Offset -- Black
For sale for 800 has 4 track passes on
AEM tru boost boost controller
For sale for – 275
defi boost gauge
for sale for - 125
Optima yellow top
taylor battery relocation kit - 165
okay here is a list of parts from the car. If i sell the motor i will part the car out. if you have interest in anything pm me and we can talk about it.
my car makes 384 hp at the wheels on 9 psi of boost from a t3/t4 .57 trim garret journal bearing cast wheel turbo. on 22 psi on same turbo the car makes 456 hp and 380 ft lbs of torque at the wheels. highest it made on this setup is 491 hp and 408 tq at the wheels and then we turned it down some
i have ran the car at the drag strip 4 times best time of 11.750 at 120 on 22 psi spinning a lot in first. backed up with an 11.80 at 118.
EVERTTHING IN THE DRIVETRAIN HAS 2,700 MILES ON IT
EVERYTHING IS OBO send me a pm if interested in anything.
LASKEY RACE MOTOR
-Benson sleeved block
-Benson balanced and micropolished crank
-CP pistons and rings
-Pauter rods
-ACL Bearings
-OEM (TypeR) oil pump
-Lower gasket set
-Blueprint and assembly
-ATI harmonic balancer
-Moroso oil pan with two bungs for the turbo oil return
-ARP head studs
-type r water pump
-oem honda head gasket
-OEM timing belt
for sale for 3,500
TOP END
FOR THE HEAD
STAGE 3 FROM PORT FLOW INCLUDING
PortFlow port & polish, SuperTech Stainless Steel nitride coated valves, dual valve springs, titanium retainers, competition 3 angle valve job, surfaced to a mirror like finish and assembly
-has inconel exhaust valves
-tuner 1 cams
-BDL adjustable cam gears
-BDL cam seal
-AEM fuel rail
-BDL throttle body port matched to intake manifold
-Edelbroke victor x intake manifold
-omni 4 bar map sensor
-precision 1000cc injectors
-studs for the exhaust and intake manifold instead of bolts
for sale for 3,000
sale the motor without distributor or valve cover for 6,000
CATCH CAN KIT
T1 catch can kit with lines, bungs, etc
valve cover with bungs welded on
powder coating valve cover
for sale for 600
radiator
for sale for - 150
AFI TURBO KIT
for sale for 2000
GSR TRANSMISSION
mfactory carbon lined synchros
mfactory helical lsd
mfactory 4.05 final drive
Competetion Clutch stage 5 with an upgraded pressure plate
ACT 12.5 lb chromoly flywheel
For sale for – 2,000
AXLES
driveshaft shop 5.9 with ABS rings
for sale for - 1400
IGNITION
Coil on plug setup with k series coils and coil plate
for sale for - 500
Aeromotive fuel pressure regulator – 100
SUSPENSION
Koni yellow shocks with ground control coil overs – has 200 miles on them
For sale for - 750
ECU with hondata s300 and boost kit
For sale for - 500
exhaust 3" thermal turbo exhaust
for sale for - 500
greddy turbo timer - 100
hasport motor mounts
for sale for - 250
24.5x9x13 MT et drag slicks with V2 Competition Weels, 13x8,
4x100, +20mm Offset -- Black
For sale for 800 has 4 track passes on
AEM tru boost boost controller
For sale for – 275
defi boost gauge
for sale for - 125
Optima yellow top
taylor battery relocation kit - 165
Last edited by phantom_bcw84; 04-03-2014 at 05:20 PM.
04-03-2014, 04:47 PM
#18
Honda-Tech Member
Re: April FS Thread
FS: K series complete standard fuel kit
I'm selling my fuel kit which consist of golden eagle fuel rail, hybrid racing standard lines, and an aem fuel pressure regulator. This kit is used and a little dirty from my turbo car, so it would be perfect for a drag car. Absolutely no leaks. $250 shipped.
I'm selling my fuel kit which consist of golden eagle fuel rail, hybrid racing standard lines, and an aem fuel pressure regulator. This kit is used and a little dirty from my turbo car, so it would be perfect for a drag car. Absolutely no leaks. $250 shipped.
04-04-2014, 07:04 PM
#20
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2002
Location: des moines, IA, USA
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
CP Eagle Ferrea ARP Spoon
CP Pistons - $500 - Part# SC7012 - BNIB, includes rings, wrist pins, and locks - 83mm 9.0:1
RODS SOLD - THANK YOU 7mile - Eagle Rods - $300 - Part# CRS5394A3D - BNIB, Big bolt, LS/B20 standard H-beam rods
Ferrea 6000 Series valves - $250 - Part# F6048(IN) / F6049(EX) - BNIB
Spoon Sports LSD - clutch type LSD - $800 OBO - Unknown miles, but upon inspection, plates look in very good shape. It is made for a hydro GSR/ITR transmission. It comes with the 10 bolts for the ring gear, and the required speedo gear. It came in a transmission I serviced with the wrong speedo gear installed. It slightly galled some of the drive, but I cleaned up the grooves, tested it in a housing, and it tracks and turns properly.
MAIN STUDS SOLD - Thank you redeg666 - ARP GSR Main Studs - $80 - Part# 208-5403 - BNIB
RODS SOLD - THANK YOU 7mile - Eagle Rods - $300 - Part# CRS5394A3D - BNIB, Big bolt, LS/B20 standard H-beam rods
Ferrea 6000 Series valves - $250 - Part# F6048(IN) / F6049(EX) - BNIB
Spoon Sports LSD - clutch type LSD - $800 OBO - Unknown miles, but upon inspection, plates look in very good shape. It is made for a hydro GSR/ITR transmission. It comes with the 10 bolts for the ring gear, and the required speedo gear. It came in a transmission I serviced with the wrong speedo gear installed. It slightly galled some of the drive, but I cleaned up the grooves, tested it in a housing, and it tracks and turns properly.
MAIN STUDS SOLD - Thank you redeg666 - ARP GSR Main Studs - $80 - Part# 208-5403 - BNIB
Last edited by h22apwrd95; 04-08-2014 at 08:46 PM. Reason: items sold
04-04-2014, 07:26 PM
#21
Re: April FS Thread
$1600
PLEASE KEEP BUMPED. THANK YOU.
OK, where to start. First and foremost If you have any and I mean any questions just shoot me a PM or EMAIL to my gmail, Salicea11.9@gmail.com
Either or is fine, I constantly check it.
I have a custom 86.5 X 92 lightweight stroker kit consisting of lightweight short skirt pistons/lightweight long rods/ and lightweight crank.
The pistons and rods are brand new never used purchased from TB Motorwork. They are Wiseco Pistons and Crower MAXI-LIGHT RODS.
The crank is a 92 mm lightweight scat crank. Purchased from Nick Arias over at Atomic speedware.
Reason I am selling is because I have no use for it. I am in school full time and not working so putting something together of this nature is out of the question.
I payed $2000 for the Pistons and rods.
For the crank I cant remember too well but I have searched online and they have fluctuated between $839.15 to 924.80. REMINDER I ONLY USED MY CRANK FOR NO MORE THAN 50 MILES.
I AM LOOKING TO GET $1600 + SHIPPING AND PAYPAL FEES.
FIRST WE HAVE THE PISTONS. THEY ARE WISECO 86.5 LIGHTWEIGHT WITH A SHORT SKIRT. THE COMPRESSION WITH A B16 HEAD WOULD BE AROUND 15.8 TO 16.5 DEPENDING ON OTHER FACTORS.
[IMG]
[/IMG]
UP NEXT ON THE LIST ARE THE RODS. THEY ARE CROWER MAXI-LIGHT RODS.
NOW WE HAVE THE CRANK. THE CRANK I USED ON MY OLD SETUP WHICH WAS RAN FOR LESS THAN 50 MILES. CAR WAS USED ONLY AT THE TRACK. IT IS A 92MM LIGHTWEIGHT SCAT CRANK. IT WEIGHS 29LBS.
LIKE STATED ABOVE, IF YOU HAVE ANY AND I MEAN ANY QUESTION JUST SHOOT ME A EMAIL OR PM.
PLEASE KEEP BUMPED. THANK YOU.
OK, where to start. First and foremost If you have any and I mean any questions just shoot me a PM or EMAIL to my gmail, Salicea11.9@gmail.com
Either or is fine, I constantly check it.
I have a custom 86.5 X 92 lightweight stroker kit consisting of lightweight short skirt pistons/lightweight long rods/ and lightweight crank.
The pistons and rods are brand new never used purchased from TB Motorwork. They are Wiseco Pistons and Crower MAXI-LIGHT RODS.
The crank is a 92 mm lightweight scat crank. Purchased from Nick Arias over at Atomic speedware.
Reason I am selling is because I have no use for it. I am in school full time and not working so putting something together of this nature is out of the question.
I payed $2000 for the Pistons and rods.
For the crank I cant remember too well but I have searched online and they have fluctuated between $839.15 to 924.80. REMINDER I ONLY USED MY CRANK FOR NO MORE THAN 50 MILES.
I AM LOOKING TO GET $1600 + SHIPPING AND PAYPAL FEES.
FIRST WE HAVE THE PISTONS. THEY ARE WISECO 86.5 LIGHTWEIGHT WITH A SHORT SKIRT. THE COMPRESSION WITH A B16 HEAD WOULD BE AROUND 15.8 TO 16.5 DEPENDING ON OTHER FACTORS.
[IMG]
[/IMG]
UP NEXT ON THE LIST ARE THE RODS. THEY ARE CROWER MAXI-LIGHT RODS.
NOW WE HAVE THE CRANK. THE CRANK I USED ON MY OLD SETUP WHICH WAS RAN FOR LESS THAN 50 MILES. CAR WAS USED ONLY AT THE TRACK. IT IS A 92MM LIGHTWEIGHT SCAT CRANK. IT WEIGHS 29LBS.
LIKE STATED ABOVE, IF YOU HAVE ANY AND I MEAN ANY QUESTION JUST SHOOT ME A EMAIL OR PM.
04-05-2014, 04:27 PM
#23
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2004
Location: FL, U.S.A.
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
Re: April FS Thread
T1 race backdoor intercooler. Hargett clamp on cold side. 3" Aluminum charge piping with Tial bov flange. Comes with all couplers and t bolt clamps. $700 **bov has already been sold.
