ECU options for JDM swap
09-04-2013, 07:05 PM
#1
Trial User
Thread Starter
Join Date: Sep 2013
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ECU options for JDM swap
I have a 97 Accord Wagon EX with a F22B1 Vtec SOHC. Swapping in a F22B DOHC JDM engine, NO Vtec, and using my original auto trans.
Both are OBD2 systems but not completely the same as the DOHC is a Japan only engine. I am looking for suggestions for engine and trans. management. Any thoughts for this combo?
Need a solution for crank position being in the distributor on DOHC engine.
Need a solution for throttle body with no set up for kick down or cruise control.
Looking for intake ideas.
Thanks for sharing your experience with me.
Both are OBD2 systems but not completely the same as the DOHC is a Japan only engine. I am looking for suggestions for engine and trans. management. Any thoughts for this combo?
Need a solution for crank position being in the distributor on DOHC engine.
Need a solution for throttle body with no set up for kick down or cruise control.
Looking for intake ideas.
Thanks for sharing your experience with me.
Thread
Thread Starter
Forum
Replies
Last Post