Bigdog1456

Bad shake on hard take off, have replaced both cv axles and half shaft and carrier bearing. Still have shake that feels like axle. I have tried 3 sets of axles from different mfgs. Any clues what it might be please help.
Thanks
Joey

ARMED

engine mounts?

Bigdog1456

Nope mounts good

Bigdog1456

I have even taken out the rear drive shaft and driven still shakes. I am actually a auto tech and I have ran into front end shake quite often. But this one has me stumped

ARMED

take the shaft off..run 2wd see if anything change

Sticker Bomb

Check your rims to see if they are out of balance.

Bigdog1456

have already removed drive shaft and driven no change.
have checked balance on tires.

ARMED

put it on jackstand...start checking your balljoints/tierod ends..look for dirty greasy tie rods..

Bigdog1456

Already checked all front end parts

microcraft

This isn't probably it but I'll toss it out anyway - Engine misfire/running on 3 cylinders when you tromp on it?