datsun71

looking for 18g turbo and haven't got any luck
Call greddy they said discontinued that turbo for
Honda

Is there any turbo that direct fit to greddy turbo kit for
B16a2

Thank

grumblemarc

iTrader: (4)

Any 18g should work shouldn't it?

Casey

iTrader: (5)

t2/t25 inlet with 5 bolt internal gated exit should work. id get a gt28r or rs and have fun. if you cant or dont want to look into it further i may be interested in buying what you have

TheShodan

iTrader: (14)

No. most 18Gs are for the DSM in a Radius flange setup with a difference cartridge

The GReddy 18G is a mitsu/Garrett hybrid.

The best ones to fit are the GT2860RS, and GT2871R series turbochargers. However, the feed line and restrictors will need to be replaced, as well as the water lines that are required to use. The turbos in this family (especially GT2871R and GTX28 series) will be about 40lbs/min. You will still need to retune.

You can always attempt to have it rebuilt, as the cartridge set is mainly Garrett parts.

nealnanoHX

Yeah a good turbo rebuild shop should be able to rebuild your 18G, unless is got tot ally trashed.

datsun71

Plan to keep my greddy turbo kit
The don't know if the turbo can be rebuilt it
Leaking bad and the turbine not spinning

For the gt2871r will the greddy elbow directly fit
And do I need to custom a new downpipe
Will the greddy blue box work on the gt2871r

komat

http://www.sdforcedinduction.com/

email those guys. when i bought my 57trim from them. they had couple of them but it was a while ago

datsun71

Thank

TheShodan

iTrader: (14)

Which use different parts than what they have available. They use a straight Garrett cartridge GTR series turbine shaft sealing ring. But the thrust plate has to be custom shimmed to work. SD forced Induction aka. PureTurbo

wantboost

iTrader: (2)

You can always give me the 18g lol....

I have a journal bearing 2860 as well