98vtec

NEW HONDA-TECH SALES RULE
- Picture of item must also contain USER NAME and DATE

Rules

- Each post must be started with FS OR WTB
- Please do not reply or quote posts in this thread, PM for all questions.
- Please do not post/type in ALL CAPS

What you CAN post in this thread:

- Engines/Any engine component
- Transmissions/Any drivetrain parts
- Electrical components such as ECU'S, ETC

What you CANNOT post in this thread

- No vehicles for sale
- No wheels
- No Brake or Suspension components
- No interior/exterior parts
- NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE


Violations of these basic rules, and your post may be deleted and lose participation in this thread.

gstrudler

WTB:

Xenocron/Mike Belben cam degree fixture kit for H-series (or possibly just the dial indicators and degree wheel)

h2b eg

iTrader: (1)

fs:

h22 89mm bore. 11:5to1 compression wiseco pistons never used $400



h22 skunk2 pro3 cams never used. brand new $450

TimKennard

FS - BNIB - ARP 208-5403 main stud kit for gsr b18c1. opened for pics. $80 shipped to lower 48 states.



FS - Supertech P4-H85-P8 pistons. New, never installed, boxed opened for pics and measuring. 85mm, 13:1 (8cc dome) $300 shipped to lower 48 states.

blacK_Dc4

Myers Competition Stainless Steel Header for the B-series . Uses a 3inch V-band to connect to a 3inch Exhaust. The entire top half is brand new, never mounted. Its been freshly re-done. The bottom half is used, but in excellent condition. All details and specs will be released to the buyer. Jack Myers himself can vouch for this header. Brand new price is $1350. Ill let it go for SOLD!!!





BMC Race Intake manifold for the B16/ITR heads . It have a 3L Plenum, and a 72mm Honda Style TB design. It is no longer in production, but was sold for $950 new. Im asking $580

aavtec

FS: Selling a B20b long block. What you see is what you get. Previous owner tried doing a b20vtec conversion and cylinder head dropped a valve and damaged the cylinder wall at first start-up. Non vtec head was then reinstalled and piston was replaced, motor runs but smokes. Taking best offers, will ship at buyers expense. Located in Sacramento, CA.

EH3forlife

For sale: Ported stock h22 intake manifold. Port work was done by DFE Enterprises in Jacksonville, FL. Manifold was wrinkle coated by rivercity powdercoating in Jacksonville, FL. Epoxy was used on some spots ( If your wondering what those dark spots are). Looking $325 obo shipped/paypal. Text 9044388288 for fastest response.

salvi2dafullezt

Up for sale is my Used Clutch Masters Twin Disk set up
$900 OBO! *IT NOW HAS NEW DISKS BRAND NEW WILL SEND OUT PICS
now on to pictures






516 828 0019

Nikos

WTB: Bseries stock cams for vtec head, b16, b18 etc

Can be damaged or just stock. Just need them for engineering analysis to manufacture billet cores so they will be destroyed eventually so I am not looking to buy cams to run, just bseries cams.

PM with a picture of what you have for sale and price

JesseEK1201

Hey guys this is Jesse again,

I am currently on the process of swapping the engine from my EK, from a single cam to a B16A2. I was told that I need to make my own distributor, I would like to know which one I need and if I will be needing the computer for an SI as well.

I have the engine, tranny, axles, t-bracket, a/c bracket but the distributor.

Any help will be greatly appreciated.

pithor-c1

iTrader: (1)

i have For sale a b18c1 p72 oem"81mm"pistons and rods,,are in very perfect condition...$125 firm+ SHIPPING AND PAYPAL FEES...absolutely nothing wrong with them,,,.....thanks !!!