The Official 2014 EP3DC5 WTB/WTT/FS Thread
#52
Honda-Tech Member
Join Date: Jul 2010
Location: houston, TX
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
I picked this up locally thinking itll fit my civic, it didnt, its for a right hand drive dash so up for grabs or anyone on here that might need.
Ill ship for 35 bucks... LMK
Ill ship for 35 bucks... LMK
#54
#55
Honda-Tech Member
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
For sale - my SSR Type C wheels, 17x7.5, 5x114.3 +42 offset. Pretty Minty condition. $1150 shipped or can remove tires and sell for less, PM me.
Link to FS thread:
http://hondamarketplace.com/showthread.php?t=3155629
Link to FS thread:
http://hondamarketplace.com/showthread.php?t=3155629
#57
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
Hello im selling these brand new performance parts of my K series set up that i never got to do. Due to the fact that things changed in my life and now im becoming a father. So i have to sell these parts. THESE ARE BRAND NEW NEVER USED
injectors 1600c are used so $200 firm
AEM boost solenoid used $50 firm
Precision 6262 new $999 firm reg price $1,075
ATI damper new $350 firm reg price $375
Tial 44mm wastegate new $345 firm reg price $362
Tial 50mm BOV new $235 firm reg price $259
Competition Clutch Twin disc $1,000 firm. reg price $1,150
injectors 1600c are used so $200 firm
AEM boost solenoid used $50 firm
Precision 6262 new $999 firm reg price $1,075
ATI damper new $350 firm reg price $375
Tial 44mm wastegate new $345 firm reg price $362
Tial 50mm BOV new $235 firm reg price $259
Competition Clutch Twin disc $1,000 firm. reg price $1,150
#58
Honda-Tech Member
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
Last edited by Dalessio; 07-15-2013 at 08:08 AM.
#59
Honda-Tech Member
Join Date: Jan 2006
Location: NJ, USA
Posts: 612
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
2004 RSX Type S that was recovered after a recent theft. The engine/trans/ecu/cluster/seats have all been taken. Driver side quarter window will need to be replaced and possibly rear bumper. The harness was cut for the seats and cluster, the ignition was busted out. Car had near 120k miles on it but was well taken care of and was owned by a female. Never raced! This is a great parts car if you have smashed up your car or if you have a wrecked or salvaged RSX here is a chance to swap all your good parts over to this shell. For the right person this is a weekend worth of work and you can be on the road again. Asking price is $2600 OBO cash. Do not waste my time with low ball offers, I am in no rush to sell it as it is just sitting in the yard. If you are serious shoot me a text or call 718-644-8100 so we can arrange for you to look the car over. The car is located in The Bronx - Gunhill Rd area.
Links to pics:
http://evilz.smugmug.com/Other/2004-...469351_pz7sRk#
PRICE IS OBO! Throw me offers!
Links to pics:
http://evilz.smugmug.com/Other/2004-...469351_pz7sRk#
PRICE IS OBO! Throw me offers!
#60
Honda-Tech Member
Join Date: Jul 2008
Location: East Chicago, IN, USA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
WTB: 04-05 civic si driver side fender and headlight, preferably black in color but whatever works. I prefer local pick up but for the right part/price I'll pay for shipping. Thanks!
#63
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
fs 3 sets of wheels looking for REASONABLE offers
BBSlm are 1600 shipped
17x8.5 +32 work emotion forged
http://hondamarketplace.com/showthread.php?t=3153507
17x8/9 work madel very rare
http://hondamarketplace.com/showthread.php?t=3130577
16x7/8 volk super fine mesh sold
http://hondamarketplace.com/showthread.php?t=3153509
17x8 bbs lm sold
http://hondamarketplace.com/showthread.php?t=3160786
BBSlm are 1600 shipped
17x8.5 +32 work emotion forged
http://hondamarketplace.com/showthread.php?t=3153507
17x8/9 work madel very rare
http://hondamarketplace.com/showthread.php?t=3130577
16x7/8 volk super fine mesh sold
http://hondamarketplace.com/showthread.php?t=3153509
17x8 bbs lm sold
http://hondamarketplace.com/showthread.php?t=3160786
Last edited by em2_jdm_cfm; 10-16-2013 at 09:14 AM.
#64
Honda-Tech Member
Join Date: Aug 2007
Location: CA, USA
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
Doing a cluster swap?
I have s2000 AP2 cluster connectors for sale!
These are for the AP2 clusters only, and will come with 50 contacts (only 20 are in the photo) that you can crimp directly onto your existing wires. This should leave you with extra contacts just in case.
$60 shipped
I am planning on making full pigtail versions that you can solder into your harness when I find suitable wire. Those will be available for $75 shipped
Please respond to AP2pigtails@yahoo.com
as I dont check my PM's as much as I should!
I also have EP3 rear calipers painted red if anybody needs a pair
I have s2000 AP2 cluster connectors for sale!
These are for the AP2 clusters only, and will come with 50 contacts (only 20 are in the photo) that you can crimp directly onto your existing wires. This should leave you with extra contacts just in case.
$60 shipped
I am planning on making full pigtail versions that you can solder into your harness when I find suitable wire. Those will be available for $75 shipped
Please respond to AP2pigtails@yahoo.com
as I dont check my PM's as much as I should!
I also have EP3 rear calipers painted red if anybody needs a pair
#65
Honda-Tech Member
Join Date: Jul 2012
Location: Near Trenton, NJ
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
FOR SALE
Driver side door handle and window/lock switch. Pretty good shape overall, just needs to be cleaned up.
Located in Central NJ.
$20 OBO
Driver side door handle and window/lock switch. Pretty good shape overall, just needs to be cleaned up.
Located in Central NJ.
$20 OBO
Last edited by NJ-JDM; 10-24-2013 at 07:00 AM.
#69
Honda-Tech Member
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
FS: Function/Form coilovers for 02-05 Civic Si. Adjustable dampening. Front shocks are blown, rears were rebuilt under warranty, revalved for 10k springs that are included with the sale. $300.
FS: Megan Street 10k front coilovers for 02-06 Rsx-s. BRAND NEW unused pillow ball mounts and dust boots included with sale. 1 lower collar is seized. $200.
FS: 5Zigen GN+ Pro Racer 5x114.3 17x7.5+42, spray painted black, come with practically new 205/50 bridgestone all seasons. I put 5k miles on them with a fresh alignment. $400
FS: 5Zigen FN01RC 5x114.3 17x9+35. Wheels need to be stripped and repainted. Come with 75% tread Aurora H107 215/45. For you hella flush people these need a 5mm spacer to clear an ep3 rear trailing arm at a tire tucking height. $600.
FS: Buddy Club Spec 2 for 02-06 Rsx-s. Typical scrapes on midpipe. Included all hardware. $300
FS: Kteller 3" exhaust for 02-05 Civic Si. It's pretty banged out and the 1/2"x1/2" hole in the midpipe. Includes vibrant ultra quiet resonator as muffler and another vibrant resonator before the rear LCA. Welded up as 1 piece. $175.
Located in central NJ. Will not ship the wheels.
FS: Megan Street 10k front coilovers for 02-06 Rsx-s. BRAND NEW unused pillow ball mounts and dust boots included with sale. 1 lower collar is seized. $200.
FS: 5Zigen GN+ Pro Racer 5x114.3 17x7.5+42, spray painted black, come with practically new 205/50 bridgestone all seasons. I put 5k miles on them with a fresh alignment. $400
FS: 5Zigen FN01RC 5x114.3 17x9+35. Wheels need to be stripped and repainted. Come with 75% tread Aurora H107 215/45. For you hella flush people these need a 5mm spacer to clear an ep3 rear trailing arm at a tire tucking height. $600.
FS: Buddy Club Spec 2 for 02-06 Rsx-s. Typical scrapes on midpipe. Included all hardware. $300
FS: Kteller 3" exhaust for 02-05 Civic Si. It's pretty banged out and the 1/2"x1/2" hole in the midpipe. Includes vibrant ultra quiet resonator as muffler and another vibrant resonator before the rear LCA. Welded up as 1 piece. $175.
Located in central NJ. Will not ship the wheels.
#70
Honda-Tech Member
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
Authentic Mugen DC5 Wing painted Artic Blue Pearl.
The wing is in great condition with two scratches on the paint of the Wing located on the underside not visible unless you look. Also the side plates were painted by the previous owner so the CF is not visible. $950 picked up in So Cal or will ship at buyers expense... More pics upon request.....
Custom Risers are not included...
Cusco Rear Sway Bar / Progress Tie Bar Combo....
Sold.
The wing is in great condition with two scratches on the paint of the Wing located on the underside not visible unless you look. Also the side plates were painted by the previous owner so the CF is not visible. $950 picked up in So Cal or will ship at buyers expense... More pics upon request.....
Custom Risers are not included...
Cusco Rear Sway Bar / Progress Tie Bar Combo....
Sold.
Last edited by JDM_Matter; 09-01-2013 at 07:01 AM.
#73
Honda-Tech Member
Join Date: Jan 2005
Location: somewhere, ukno, USA
Posts: 2,734
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
Hi everyone,
I upgraded some stuff and got some stuff laying around. All these parts came off my 05 type S. If you have any question please pm me. I need this stuff gone. If you need shipping, please let me know we can work something. All these parts made 220whp on my car with no problem. Alright here are my parts
AEM V2 with filter: has a small paint scrape due to hitting the hood due to rocking the rrc: asking 140 or obo
Greddy SP2: Its in decent shape, doesn't have any dents, but there is scraps on the midpipe but no dents at all: pending
Primary 02 sensor: for 02-04 type s: only had it on for 8k, don't need it anymore: asking 120 or bo
Alright again more than willing to work with people. Thanks
picsics:http://s947.photobucket.com/user/600...=recent&page=1
I upgraded some stuff and got some stuff laying around. All these parts came off my 05 type S. If you have any question please pm me. I need this stuff gone. If you need shipping, please let me know we can work something. All these parts made 220whp on my car with no problem. Alright here are my parts
AEM V2 with filter: has a small paint scrape due to hitting the hood due to rocking the rrc: asking 140 or obo
Greddy SP2: Its in decent shape, doesn't have any dents, but there is scraps on the midpipe but no dents at all: pending
Primary 02 sensor: for 02-04 type s: only had it on for 8k, don't need it anymore: asking 120 or bo
Alright again more than willing to work with people. Thanks
picsics:http://s947.photobucket.com/user/600...=recent&page=1
Last edited by AMLS4dr200whp; 10-07-2013 at 09:31 PM.
#74
Re: The Official 2013 EP3DC5 WTB/WTT/FS Thread
fs regamaster marquis promoda's 17x7 +45 900 shipped
http://hondamarketplace.com/showthread.php?t=3174604
http://hondamarketplace.com/showthread.php?t=3174604
Last edited by em2_jdm_cfm; 10-16-2013 at 06:50 PM.