Help with EF Si harness??
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2013
Location: Las Vegas
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Help with EF Si harness??
Okay I just bought a ef Si hatch and know a lil bit bout Hondas, I have the Si chassis harness but no engine harness, I can't seem to find engine harness but DX and Crx si but the plug on drivers side don't match up with my chassis harness by the resistor box plug on the Crx si. On my harness it is the round plug but on the Crx Si engine harness is square and has less wires pinned into the plug, I have a full DX converted obd1 full but I want to try and just make a Si harness that fits, I just built a ls vtec motor. Anyone can help me??
B16 head stock valve train
Golden eagle head studs
ITR cams
Type r mani
Godspeed fuel rail
Blox FPR
680 cc injectors(RC)
Block
LS B18a1
Eagle H beam rods
PCT(B16b) pistons
LS crank
Type R LSD tranny
Wondering if I will hit higher than 200?
Another question is that cr calculator right? It says it is a 13.9:1 cr?
B16 head stock valve train
Golden eagle head studs
ITR cams
Type r mani
Godspeed fuel rail
Blox FPR
680 cc injectors(RC)
Block
LS B18a1
Eagle H beam rods
PCT(B16b) pistons
LS crank
Type R LSD tranny
Wondering if I will hit higher than 200?
Another question is that cr calculator right? It says it is a 13.9:1 cr?
Thread
Thread Starter
Forum
Replies
Last Post
thecruzs2007@yahoo.com
Honda CRX / EF Civic (1988 - 1991)
4
11-22-2011 11:57 AM
mike84 CRX-GTL
Honda CRX / EF Civic (1988 - 1991)
8
09-12-2005 03:45 PM
H22AEG2
Honda CRX / EF Civic (1988 - 1991)
6
10-17-2003 08:36 PM