chad

MUST HAVE PICTURE

Only post for sale ad's of Race PARTS or SUPPLIES
NO WTB

DO NOT REPLY TO A POST.....PM the person....Keep this thread free of banter....just FOR SALE Posts

MUST HAVE:
Picture
Contact
Location
Price

If you do not follow rules your post will disappear !

Chad

teg97

iTrader: (3)

I am selling my first gen HiTech B series header so I can get my caR finished.

There is a small dent on the bottom but nothing like you've seen with other header's. The dent doesn't restrict flow at all. Overall I would give this header a 9/10.


I'm located in North Atlanta, Ga
SOLD

I can take more pics if I need to

howl

iTrader: (3)

Located in So. Cal (Chino area)
Txt @ 909-529-6833 or PM

BELL M4 SA2010 helmet (Medium, Flat Black) - Never dropped, no accidents, kept in original bag and box, immaculate condition. $360 OBO

Sparco ice nomex balaclava (single eye opening) - Still have original packaging, also immaculate. $50

Both bought from ogracer.com a year ago and have only seen one track day! Has been stored in original box/packaging since then. Serious offers only, no trades.

Attachment 533832

Attachment 533834

NEW Hondata S300 installed into OBD1 P28 ECU from phearable.net - $675 OBO
Attachment 533835

NEW Yonaka OBD2a to OBD1 ECU harness - $50 OBO
Attachment 533255

NEW Toda v2 B18C header - $1400 OBO
Attachment 533836

NEW Aerocatch hoodpins - $60
Attachment 533256

NEW Koyo radiator for ITR w/ cap - $320
Attachment 533257
Attachment 533258

Buddy Club EG/DC passenger low down seat rails - $120 OBO
Attachment 533837

NEW Buddy Club EG/DC driver low down seat rails - $160
Attachment 533838

VIS DC OEM style carbon fiber hood, no chips or cracks but needs clear coat - $180 OBO (Local only)
Attachment 533259
Attachment 533839

powerneedy

This is a Mocal oil cooler "kit" SOLD

Simon Tibbett

I have an Impact Super Sport helmet for sale, SA2005, very clean, size small. Asking $170.00, located down the road from Road Atlanta, will ship at no extra cost. Includes helmet, Impact helmet bag, and original box.

PM me with any questions.

Pics:

Katman

K-series bolt-in oil pan baffle kit
Kit consists of a Jun bolt-in main baffle (same one Blueprint Racing use to offer) w/mounting hardware. Mounts on top of windage tray. Also includes a TracTuff timing chain baffle plate. Excellent bolt-in kit for budget minded road racer! I run this setup myself and road race quite often...this kit is awesome and the most affordable on the market.

100% bolt-in affair for the following K-series engines:
K20A2, K20Z1, K20Z3 w/Type-S oil pump and pan conversion
K20/24 frank using a Type-S oil pump and pan.

$200 shipped or local pickup.
SoCal San Gabriel Valley area.
PM or email: jason.katman@gmail.com
I have a few of these kits on hand.













(trac tuff tchain baffle installed)








Also have a set of weisco k-series 11.7cr pistons for K20 that can be read seen here:
https://honda-tech.com/forums/sale-10/fs-k-series-weisco-87mm-11-7cr-pistons-k-series-oil-pan-baffle-kit-3115740/

what gsr

iTrader: (3)

sold

tronic

Cobalt GTSport front and rear brake pads for 99-00 Honda Civic Si (or EX)

SOLD

KIWI

USED K-20 RSX (S) Refurbished Parts Available-
In our constant Race testing of GEAR-X Products we have acumulated a decent pile of almost new to slightly used K-20 Gear sets That have been replaced with the very poular Pro-Series Close Ratio Gear Sets. All these have been thouroughly inspected, Bead Blasted, some have been WPC Treated. Perfect if your rebuilding that race box but don't want to pay for brand new parts - No warranty but if you are not happy I'll give you your money back... or give you another gear.

TOO CONFUSING...
I'll post again with Photos and Part Numbers

Kiwi

itrSteez

2 Recaro SPG's with 3/11 and 5/11 FIA stamps (still plenty of time left on them)... Drivers seat has two holes in the cloth from my DefNder, other seat is mint.

$1500, no shipping, no separating

$1800, will include Schroth Profi-II HANS and Schroth Clubman harness with similar certification dates as the seats

$2200, seats, harnesses and a pair of PCI DC/EG brackets



More info here
http://www.roadraceautox.com/showthread.php?t=43045

00IntegrAllmotoR

iTrader: (1)

FS: New Hawk HP+ front pads for ITR = 100 shipped

Katman

Enkei PF01 Silver 15x8 +35 wheels.
Bought them back in November, engine died in november, been sitting since. I have the original boxes and lugnut sockets.

Usually sell for about $199ea new.
$750 FIRM, tires not included.
prefer local pick up (socal, SGV area, or even at JHPUSA).
Hit me in the privates.

VTECIntegra9

For Sale:

Brand new set of std. size (81.00mm) Honda OEM Piston Rings.

I bought these along with some other engine parts from a dealership and since then I found out I will be going oversize on my pistons. The stealership I bought them from would not take them back after 10days from purchase.

So I am looking for $110shipped or best offer!

email: vtecintegra9 at hotmail dot com or send me a PM (slower response from me)



Other Items I have started listing for sale: More info and pictures upon request as I am in the process of taking all of my pictures, etc. Will take reasonable offers.
All parts from 1994 Integra GSR USDM


50% GSR Carbotechs free
Power Steering Pump and Resevior $20.00
ABS Module $15.00
ABS Hydraulic Unit (94,95) $50.00
Integra Passenger Airbag $15.00
Cruise Control Stuff (removed) $15.00
Full Rear Interior $150.00
Carpets $20.00
A/C Compressor, evap, etc $20.00
Aftermarket Fog Lights New never installed $30.00
Oil Pan w/ Hole in it $1.00
B18C1 Camshafts $150.00
Silver/Aluminum Dash dress-up Kit $10.00
GSR Valve Springs $40.00
GSR Valves $40.00

SHG_EasyE

SOLD

goinpro7

Hey guys I am selling a few parts that I was going to use on my 97 Ek race car. Car was sold due to lack of time to track. All of these parts were purchased from Jeff - Kiwi at Special Projects MS...

I am selling the stuff cheap as I would like to move it rather quickly. All parts are brand new, never used.

Paypal is fine with me and all parts will be shipped UPS.

Anyone interested feel free to email me: martin.dettelbach@gmail.com

PCI Rear Trailing Arm Bearing Kit- $200



Gear X AC107 5.08 Final Drive for K20 - $500
GX AC107 Integra DC5, EP3 ’02- K20 DOHC ROAD RACE This Final drive is best suited for most Road Racing applications. If using Stock Gear Ratios. And it works extremely well with the GXHO-K CR2 Close Ratio Gear Set



Gear X GXHO KCR2 - $1500
http://www.specialprojectsms.com/gear-x/gxho-k-cr2.html
Designed as a Drop in replacement Kit.
1st, 2nd. 3rd, 4th , 5th, 6th.

Suitable for full race K-20 or K-24 where very close ratio
applications are required, such as road and gravel rallying.
Sprints, hill climbs or road race. Works extremely well with
a 5.06 or 5.08 Final Drive.
Ratios: 1st - 2.313 2nd -1.650 3rd -1.304 4th - 1.080 5th - 0.958 6th - 0.851
Kit consists of: A custom Main shaft, 4 custom Main Shaft Gears and Six Counter Shaft Gears.







Carbon Synchro's for DC5 Dual Cone 1-6 $125

goinpro7

Hi Guys-

Also have full P1 Spec aero for 97 EK hatch.

Front splitter kit - $300
Sideskirts 5" Ek Hatch - $200
Rear Diffuser - $200

20CiviC02Si

iTrader: (3)

Ok guys i'm selling off my spares from my race car, as well as other parts that i have acquired over the years. Trying to build up the funds to compete this year for NASA TT/PT racing.

Only interested in cash and reasonable offers, not really interested in trades.

Used Koni/GC w/ GC Extended Top Hats - Bought them used with 15,000 miles, had to purchase a taller spring for the fronts to get ride height correct. Worked perfectly fine, just came across a better setup for my race car, so i swapped it out.

$700 Picked Up



Pair of TR Motorsports 15x7 +42 Wheels $175 Picked Up
Used for only one weekend.


New eBay ITR Rep Header $50 Picked Up



New Aluminum Crank Pulley $25 Shpped


K20 Valve Cover Painted Minor Chips $50 Picked Up


EM1 Energy Suspension Motor Mount Bushings BNIB $20 Shipped



Used EM1 Electric Mirrors Black $90 Shipped OBO




More to come once i have pictures.

99 Si wheels that are pretty beat up but cheap. $100 Picked Up

SHG_EasyE

sold

FerreiraCompetitions

For sale is a 1" MC (25.4mm) from the ITR and brand new Hawk Blue ITR front and rear pads.



Looking to get $100 for the MC and reservoir.



$150 for front pads and $90 for the rear or $200 for the set

Located in Charlotte.

Thanks.

circuitdevil

Car is gone, so I have some race parts left over:

LOCATION: CANADA. Close to Blaine border.

Autopower Rollbar (FA5 - Sedan Only, Si and non Si) - This cost me nearly 1000$ after shipping and duty, plus 1 month wait time. I got it to run the Knox mountain hill climb and Solo1 events. Its great, bolt in and I managed to get it out in an hour by myself. Great for trackdays, time trials, time attack and looks killer on the street. I got it with the cross brace option for mounting fire extinguisher. CACC, SCCA and NASA legal for competition events. Paint is not perfect on really close inspection, but looks great even from the driver seat.

-450$





Sabelt FIA Bucket Seat XL - Imported from Europe about 8 years ago by a local roadracer. Very light, high quality Italian product and the best modification I made to the car. Fits even my bigass 36 waist. Will be tight in the shoulders for a guy with a wider chest. I used it to DD with the harness, really improved the driving feel plus can be mounted really low. Have side mounts and sliders. A couple small scuffs and rips from dailydriving, overall 8/10 shape.

-240$





Motegi FF5 wheels with 225/40/17 Hoosier A6 Race Tire

Nothing fancy, tires are nearly done, one showed a little cording because my car has no camber and I took it out for a couple hot laps at mission in the summer heat. Might pass for another autocross season. Dual bolt pattern.

-400$



Ingalls camber bolts for 8th gen Si, 2 boxes, I think its good for a max 2-2.5 camber per side, Unopened, BNIB. Paid 60$ frod redshift, they been sitting for a year or so unopened.

-40$

Prices are firm, will let it all go for 900$, would really prefer to let go as a package. I am in South Surrey, Vancouver area, local preferred. Half of this **** is expensive and hard to ship.

SHG_EasyE

sold

ozal92

Autopower Rollbar made for an '88 CRX with the pillar mounted seat belts. Can fit the door mounted ones but it's a little bit tighter fit. It's the race rollbar so it has the diagonal brace and harness bar. In good shape and untested . Just a few scratches on the paint from the install/removal in the car. Located in Miami, FL 33186. For sale at $300 firm + whatever shipping is. Keep in mind it is a heavy piece. If interested, please email me at apexalignment at gmail dot com as I'm not on this forum much anymore. Thanks.

got-vtec?

iTrader: (4)

Corbeau seats, harnesses and rails for eg/dc. Very good condition.
$675 for both obo
San Antonio TX
210-300-0232

cloviskilla

iTrader: (2)

sold

mullet eater

i have a wavetrac diff for k trans, came out of a 08 si i would like to sell or trade it. it still has the diff bearings on it, has about 6k miles on it. daily driven only
im looking to trade it for a b16 lsd not really picky on what kind, or for a 4.7 final drive for the same trans.

or if u have any other ek hatch parts or b16 engine parts you think might be a good trade hit me up.

you can pm me or text 573 944 2477

if interseted in buying id like to get 400 shipped