Dead CIVIC

iTrader: (1)

my rear side window seal is so faded, or dry rotted it looks really bad.

I'm thinking about painting it, if so what color should I do... flat clack? semi gloss? or is it easily replaceable?

I'd much rather replace it but I cant find the part on any site, or i just don't know what its called... any input is appreciated thanks.

Dead CIVIC

iTrader: (1)

http://www.hondapartsunlimited.com/p...quarter-window

found it 7&8, how is that part replace

beyond305

i was at advanced auto and saw some paint for vinyl/rubber trim. VHT has a vinyl spray paint thats pretty good too. you would just have to make sure to mask the area off really good. Id go with a satin finish.

http://www.autopartswarehouse.com/sk...apwSP950sppavh

EsotericImage

iTrader: (8)

dont paint it.. your putting a bandaid on a problem..

if its dry rotted then just replace it. The link above has the part

RSXting

iTrader: (3)

You can get the seals from BKHonda under rear quarter glass. I think it was like 40-50$. BK has good prices with 30% off Honda and they're quick. Check out my build thread. What I did was I painted that area completely (with the rear quarter glass and seal out) and I put the new seal on (OEM from Honda), see what touches, wire wheel the paint off that the seal would touch off, and use polyurethane to seal it to the window. Pretty easy but make sure that you purchase the Honda OEM seal. Hope this helps

Dead CIVIC

iTrader: (1)

sounds easyish, I'm gonna check out your thread, I changed my mind about painting it, I'm going to replace it, what does BK stand for?

NOFX

If you do not desire to replace the seals, I would suggest dying the seals black instead of painting them. The dye lasts a long time and can not flake.