rebuilt engine cannot turn over by hand with trans
11-20-2012, 06:23 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: SD Thief KiLLER, ca, thief killer
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
rebuilt engine cannot turn over by hand with trans
just rebuilt the bottom end, and everything spun just fine with the head off. then i attached the block to the trans and wondering if it's stuck in gear?? so thus the engine will not turn over by hand. I reattached the shifter cable to the auto trans and shifter is in N. so what could be causing this **** to be stuck??
2004 lx auto
2004 lx auto
11-21-2012, 06:22 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: SD Thief KiLLER, ca, thief killer
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Re: rebuilt engine cannot turn over by hand with trans
I'm thinking it's this part right here that isn't connected to the metal bracket correctly.
11-21-2012, 05:46 PM
#4
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: SD Thief KiLLER, ca, thief killer
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Re: rebuilt engine cannot turn over by hand with trans
so i pulled the head, and now its just the block and trans. something is binding, any thoughts? something to deal with the torque converter?
11-25-2012, 02:29 PM
#5
Re: rebuilt engine cannot turn over by hand with trans
I'd really like to be able to say "It's probably this" but ultimately you're just going to have to go back through the work you've done up 'til now and find out where it went wrong.
Thread
Thread Starter
Forum
Replies
Last Post
valorracer
Honda Civic / Del Sol (1992 - 2000)
36
08-18-2011 12:24 AM
Augie56
Honda Accord (1990 - 2002)
3
03-03-2008 05:19 AM
flyinga
Honda Accord (1990 - 2002)
9
11-28-2005 11:38 PM