Apply brakes and blinker stops working...
08-27-2012, 04:52 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Apply brakes and blinker stops working...
When i apply the brakes with the left blinker on, the blinker stops working.
If i apply the brakes without the blinker on the blinker light on dash lights up.
WTF... Any suggestions?????? Im lost.
Ive done a search but they just say to check the bulbs. Bulbs are all correct...
If i apply the brakes without the blinker on the blinker light on dash lights up.
WTF... Any suggestions?????? Im lost.
Ive done a search but they just say to check the bulbs. Bulbs are all correct...
08-27-2012, 05:25 PM
#2
Re: Apply brakes and blinker stops working...
96 Cvic? What trim?
Check the G601 ground in the rear. The rear turn signals and brake lights share this ground.
Check the G601 ground in the rear. The rear turn signals and brake lights share this ground.
Last edited by Former User; 08-27-2012 at 05:47 PM.
08-29-2012, 04:29 PM
#4
Honda-Tech Member
Join Date: Jan 2012
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Re: Apply brakes and blinker stops working...
This happened when i put 2000 tail lights on my 97 and kept the wiring of the tail lights from the 2000. changed it back to the original 97 wiring and bulbs and then they worked normally again.
Thread
Thread Starter
Forum
Replies
Last Post
skydvrgirl
Honda Civic / Del Sol (1992 - 2000)
7
11-21-2013 05:16 PM