Need Some Help With My Brake Tuck!!
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: MassWeBoostShit
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Need Some Help With My Brake Tuck!!
Ok, so im in the middle of my brake tuck, got my prop valve where i want it and figured out where i want to run my lines through. Ive read the H-T brake tuck guidlines plenty times as reference and it say to get 10x1.00mm to -3an for the adapters but i cant seem to find that size. Smallest size i found was 10 x 1.00mm to -4an? otherwise will i have to run -4an lines or thats way too big?
So if anyone can send me a link to a page that sells these or maybe i'm searching them wrong? But its pretty straight forward, it clearly say 'metric to an fittings'
Thanks in advance H-T
So if anyone can send me a link to a page that sells these or maybe i'm searching them wrong? But its pretty straight forward, it clearly say 'metric to an fittings'
Thanks in advance H-T
#2
Honda-Tech Member
Thread
Thread Starter
Forum
Replies
Last Post