alves_sergio777

good job.
were i find the clearaces for main and road bearings?
i do a low comp. rebuild on my z6 and i want to check clearances but i dint find the min and max ones and i want ti see if all ok.
sorry my inglish im for portugal and now live in england.

tollickj

nice job. I'm about to rebuild mine and I'll be using this as one of my reference's when doing the job.

jm22854

How much does one of these go for? I currently have parts for one engine, but i have two blocks and one head. Im trying to make a profit off it because i bought it all for 50 bucks. Its not in nice silver condition like this one is but i'm looking to do as much DIY for the money. Any advice?

tollickj

depends on what engine it is and the state its in. what is it?

apexi_rsx

I just did my rebuild the exact same way maybe a year ago. I did a wiseco & eagle build so i had a few extra steps of knotching the block and girdle for the rods and rod bolts. LoL Vtec definately does not crack or make any real noticeable power on the SOHC. Even with turbo you hardly feel or hear it. Its not like a B/H/K series kind of vtec. Nice right up. I used the plasi gauge and lucus break in lube as well.

B_Swapped93

This is a great write up im rebuilding my Y7 head this helps clear up a fiew things

greenteadude

i wish i knew how to put engines together

jbpnoman

So pick it up and learn. It's stupidly simple once you get the hang of it.

crAsh_kun

Yeah, that's what I've been told too, and that's why I'll try and rebuild one.
For the first one, it is said you just need to be extra patient, and take all the time needed to get things done right.
After that, magic operates, and with guides like this one, you (almost) can't go wrong

MIrisingsun

hello doing a full rebuild on my d16z6 wondering what rebuild kit you used, and where you got it? this is the best breakdown for my friends who dont know anything about japanese cars. thank you

Ej8_Santos

Awesome. Couldn't find a write up for a d16y8.
Same crap pretty much. I'm doing a eagle wiseco 75.5mm

baker360

my head numbers read p2a 10 is this a vtec head? what heads can b run on a d16z6 block? shud i run a d16y8 head?

grumblemarc

iTrader: (4)

You've asked this question 3 times already. Did you bother trying to Google the information? The answer would be no.
https://www.google.com/webhp?sourcei...w=1904&bih=929

What does identifying your cylinder head have to do with this thread?

baker360

thanks buddy i read em kinda my first project car trying 2 read up as much as i can on it kinda more of a certified body tech than a mechanical tech oh n sorry if i posted it in the wrong place

Sax-o-fun91

Thank you very much! I can't wait to try this myself.

euroexportinc

Great job California dad.

5thstage

Nice work man !

ClutchPapi

damn i wish i could do that /:

grumblemarc

iTrader: (4)

Why can't you?

CaliforniaDad

iTrader: (6)

yeah not too hard if you take your time and DL the repair manual.

Ej8_Santos

Just used this for rebuilding my y8, yeah cant get any easier than following this.

Oregonducks411

Awesome write up!! I learned alot from your ads *thumbs up*

ragingsarcasm

Excellent write up.

Dropseaa

Same car.

"As smooth as a babys butt"

Lawl.

Cody Pereira

I was a little worried about doing the full rebuild that my D16Z6 needs... after reading this write-up, im not concerned at all! Nice job, will be referring to this within the next few weeks.