You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today!
I just bought this honda accord from a woman who lives next door to me and she said the only problem with the car is the tachometer..well the car is an automatic trannie with no tach..but i noticed some of the wires from the distributor to main harness have been cut,so I rewired all yhr wires correctly color coded and replaced the hitachi distributor module,coil,ignitor(primary pickup coil) 4 new spark plugs and wires and i still have no ignition spark..i was told to replace the cpu under the drivers side belly pan,and i did that too,and still nothing,no spark!! can anyone help me out with this problem?? I have traced all the wires with a good voltmeter and have all the correct voltages everywhere they are supposed to be..help me please??
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.