ANTI_LAGs Fab/Eng/Welding This&That Thread
#1
OG Fabricator
Thread Starter
Join Date: May 2011
Location: Houston, TX
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
ANTI_LAGs Fab/Eng/Welding This&That Thread
Well I have been a hardcore lurker on here for a pretty long time, decided I would post some things old and new that Ive done ranging from manifolds, cages, plumbing all the way to design and prototyping sheet metal and cnc products as well as some random pics shot around the fab area. Please excuse the quality of the pics as most times I just grab my Iphone and snap pics here and there. Ill try to post pics as soon as I find them on my laptops and phones.
A2W I finished up for a auto S2k im finishing up, should be good for some high psi now lol
Surge tanks
Run of some catch can combos I make
Full 316 stainless cab, these get coated and store plant electronics
WG Dumptube recirc add on to a MK4 customers existing DP
EG Fuel Tank I designed and fabricated for Little Joses 8sec outlaw, this design made it 1 week untill it was ripped off.
A2W I finished up for a auto S2k im finishing up, should be good for some high psi now lol
Surge tanks
Run of some catch can combos I make
Full 316 stainless cab, these get coated and store plant electronics
WG Dumptube recirc add on to a MK4 customers existing DP
EG Fuel Tank I designed and fabricated for Little Joses 8sec outlaw, this design made it 1 week untill it was ripped off.
#3
OG Fabricator
Thread Starter
Join Date: May 2011
Location: Houston, TX
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Re: ANTI_LAGs Fab/Eng/Welding This&That Thread
Some other catch can, cant remember what it was for..
4" v-band DP for MK4 Supra
S2K DP
Random 16g 304L weld I did
Mazda RX-8 T4 manifold that I had to replicate the shitty one he already had, just instead of 16g I used sch10
Me welding on a cage
4" v-band DP for MK4 Supra
S2K DP
Random 16g 304L weld I did
Mazda RX-8 T4 manifold that I had to replicate the shitty one he already had, just instead of 16g I used sch10
Me welding on a cage
#4
Honda-Tech Member
Join Date: Jan 2005
Location: Lower Right Hand Corner, PA
Posts: 5,643
Likes: 0
Received 0 Likes
on
0 Posts
Re: ANTI_LAGs Fab/Eng/Welding This&That Thread
I want access to a plasma table so bad.
Work looks great man, what do you mean by the design for the fuel tank was "ripped off"? I take it you mean someone built a similar design and not that it fell off the car? Lol
Work looks great man, what do you mean by the design for the fuel tank was "ripped off"? I take it you mean someone built a similar design and not that it fell off the car? Lol
#5
Re: ANTI_LAGs Fab/Eng/Welding This&That Thread
Looking good Dave, deff improved your aluminum welds! Nice to see ya posting pics and what seems to be actually enjoying fab work again.
-Collin
-Collin
Trending Topics
#9
OG Fabricator
Thread Starter
Join Date: May 2011
Location: Houston, TX
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Re: ANTI_LAGs Fab/Eng/Welding This&That Thread
Transformer oil soak tank, made from .125 aluminum, this all starts as basic flat sheet.
Heres some real Death Metal lol, got a shipment of aluminum hinge sent wrapped in the obituary's
Random sign I put on our Amada shear
Fun in the fab area, me on right, David aka Ginger on the left
Me crunching the numbers and drawing my projects in the flat, notice the 2 cups of coffee haha
Heres some real Death Metal lol, got a shipment of aluminum hinge sent wrapped in the obituary's
Random sign I put on our Amada shear
Fun in the fab area, me on right, David aka Ginger on the left
Me crunching the numbers and drawing my projects in the flat, notice the 2 cups of coffee haha
#12
OG Fabricator
Thread Starter
Join Date: May 2011
Location: Houston, TX
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Re: ANTI_LAGs Fab/Eng/Welding This&That Thread
Quick Log I threw together overnight for my buddy Will Parsons F20C powered AE86 drift car that I sponsor, dont mind the turbo flange, we were out and this is all we could find, I prefer the BMC Race T3 log flange, but hell, you got to do what you got to do. Also the WG is something different I did, being that we were running ethonal laong with high compression with 9k rev limit on a log I wanted to make sure the little 38mm wastegate would work as good as it could... we built a turbo kit and tuned this car on ProEFI same night..
#13
OG Fabricator
Thread Starter
Join Date: May 2011
Location: Houston, TX
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Re: ANTI_LAGs Fab/Eng/Welding This&That Thread
Car made it to the event the next day, but the shifter didnt do so well, me trying to fix it
random weld pics
rear wheel speed sensor pick ups i made for the wheel
ECU/Relay Mount
random intake
A2W
2008 Ninja ZX-10R Turbo Kit I made
Crazy *** dumptubes I made for Little Joses Outlaw civic
random weld pics
rear wheel speed sensor pick ups i made for the wheel
ECU/Relay Mount
random intake
A2W
2008 Ninja ZX-10R Turbo Kit I made
Crazy *** dumptubes I made for Little Joses Outlaw civic
#14
OG Fabricator
Thread Starter
Join Date: May 2011
Location: Houston, TX
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Re: ANTI_LAGs Fab/Eng/Welding This&That Thread
Random
A2W Tank
V-band S2K manifold
Hawaiis EG roll cage, i built it with 100% full interior including back seats, chromoly
B-series into HX civic pass mount I made for a customer
FG Civic A2W kit after I made a couple of revisions
Sumped oem EG tank
A2W Tank
V-band S2K manifold
Hawaiis EG roll cage, i built it with 100% full interior including back seats, chromoly
B-series into HX civic pass mount I made for a customer
FG Civic A2W kit after I made a couple of revisions
Sumped oem EG tank
#15
OG Fabricator
Thread Starter
Join Date: May 2011
Location: Houston, TX
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Re: ANTI_LAGs Fab/Eng/Welding This&That Thread
I think thats good for tonight, now I need to dig up the pics from the turbo F22 powered T-rex I built...
#16
OG Fabricator
Thread Starter
Join Date: May 2011
Location: Houston, TX
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Re: ANTI_LAGs Fab/Eng/Welding This&That Thread
#22
OG Fabricator
Thread Starter
Join Date: May 2011
Location: Houston, TX
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts