jayscivi

Will a set of coil overs off of a 1993 eg fit on a 96 ek

jserman

yes

racerx510

what he said

rayvo

iTrader: (1)

yes they will fit, the rear will just need spacers on inside of the lower strut fork...

98civdx

^ That is only if the coilovers came with shocks, he could just be talking about slip ons.

dwkt

EK LCA bushings are thinner than the LCA bushings on an EG so if you remove the coils from an eg and put them on an EK you will need the spacers for the rears. they look like thick washers and can probably order then from any shop, I know skunk2 sells them.

if you are just talking about sleeves then Ive wasted my time telling you about the LCA's and you are good to go.

jayscivi

I only have springs and the adjuster no shock or anything

jayscivi

Also I coul use a good instructional video on how to do this because I am doing this tomorrow night

grumblemarc

iTrader: (4)

What brand of coilover and what shock is it going on?

jayscivi

The brand is cla and there going on the stock civic shock thAts on the car now

eg62012

yes they will

98civdx

CLA? WTF is that?


Good luck, your going to have a very bouncy car.

grumblemarc

iTrader: (4)

CLA=Ebay.

Red_Army

well...don't do that.
or this will become how do i fix my blown shocks thread.

delsolo95

lol so true!

jayscivi

What

grumblemarc

iTrader: (4)

Coilover sleeves + stock shocks = Blown stock shocks.

jayscivi

How does that work ? How will they blow

MonkeyBoy668

Because the stock shocks are designed to work at stock heights and running them at lower heights damages them, eventually leading to permanent damage (AKA blown shocks). When you lower the shock you increase the amount of pressure in the tube, constantly running at high pressure causes a blowout because they're not designed to run at high pressure all the time.

98civdx

Don't forget spring rates.


OP, do you even know what the spring rates of the coilovers are?

509ernie

Monkeyboy668 is right after a while your car will be bouncy as f**k