99 em1 with b18c
#1
99 em1 with b18c
my 99 si has a jdm b18c, the harness in it is ****ed so i wanna put in a new one. besides make a harness, what harness should i use? obd2b i assume but it seems like there is so many extra plugs un used. any advice?
#4
Honda-Tech Member
Join Date: Nov 2011
Location: Illinois
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Re: 99 em1 with b18c
Just to further support the other two's comments, my 99 EM1 has a JDM B18C-R and is using the EM1 harness with a P73-003 ecu. I bought the car this way but while going over it the only extra plug that isnt being used is the IAT sensor in the IM, Im using the IAT from the intake tube instead.
#5
Crazy Honda Guy
Re: 99 em1 with b18c
if it's a jdm B18C, there should be an empty plug for the CF sensor by the crank pulley
and as others have mentioned, the 99-00 Si harness is what you want
and as others have mentioned, the 99-00 Si harness is what you want
Thread
Thread Starter
Forum
Replies
Last Post
keogsr1
Honda Civic / Del Sol (1992 - 2000)
2
05-16-2007 11:29 AM