p28 injector driver question
#1
p28 injector driver question
I have a p28 ecu with damaged injector drivers. I have a p06 and p2e ecu and was wondering if the injector drivers from either of these would be compatable in my p28 if i were to desolder and solder in good ones?
#3
Re: p28 injector driver question
I've damaged my injector drivers due to running without the resistor box the first time i ran the car. How would changing out the drivers cause my ecu to burn up if I have the resistor box wired in? I just want to know whether or not they are the same
#4
Re: p28 injector driver question
Yeah they are the same you could also solder in the components for vtec on those ecus I'm sure if you did a search you could find what to add and where to put it Honda only used 2 or 3 different boards for all those ecus and if you're going to open your ecu replace the electrolytic capacitors they only have a 15 year life expectancy
Thread
Thread Starter
Forum
Replies
Last Post
evosix
Engine Management and Tuning
5
05-23-2016 12:34 PM
Whiteintegra
Classifieds: Forced Induction
10
08-02-2006 10:37 PM
TURBO DC2
Forced Induction
1
05-28-2005 10:41 AM