Is it possible to ID these headers?
#1
Honda-Tech Member
Thread Starter
Is it possible to ID these headers?
They are on my 01 DC2R and they are 2.5". Sorry but i tried to get the best pictures i can.
I have been told they are mugen titanium replicas (?), replica JDM ITR or Fujitsubu. The reason i ask is i wouldn't mind buying some RMF 4-1, but if these(whatever they are) are just as good, i will not bother.
Thanks
PS Last pic, that is NOT dent, just some dust
I have been told they are mugen titanium replicas (?), replica JDM ITR or Fujitsubu. The reason i ask is i wouldn't mind buying some RMF 4-1, but if these(whatever they are) are just as good, i will not bother.
Thanks
PS Last pic, that is NOT dent, just some dust
Last edited by mr_munro; 08-23-2011 at 02:18 AM.
#3
Honda-Tech Member
Thread Starter
#4
A Digital Frontier
#7
Honda-Tech Member
Thread Starter
Re: Is it possible to ID these headers?
I dont agree with them being Ebay...the person i bought the car from has modified the car with quality parts (Tein, Fujitsubo, Spoon) and for them to wack on cheap headers does not make sense.
Trending Topics
#10
Honda-Tech Member
Join Date: Sep 2008
Location: nowhere ville.
Posts: 2,039
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible to ID these headers?
you would be suprised at what people will cheap out on. non of the quality header companies i can tell you that much.
#11
Honda-Tech Member
Join Date: Mar 2009
Location: wilkes-barre , pa
Posts: 3,384
Likes: 0
Received 0 Likes
on
0 Posts
#13
Honda-Tech Member
Thread Starter
#15
A Digital Frontier
Re: Is it possible to ID these headers?
http://hondamarketplace.com/showthread.php?t=2737913
Its okay to own ebay parts, its not the end of the world.
#16
Honda-Tech Member
Join Date: Nov 2007
Location: bronx, ny, usa
Posts: 1,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible to ID these headers?
maybe he had a real nice mugen/spoon header and swaped an ebay header to sell car...and his real one is hanging on a wall somewhere..
#18
Honda-Tech Member
Join Date: Aug 2007
Location: Morgantown, WV, USA
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible to ID these headers?
i may be wrong, but dont nearly all JDM headers have the "JASMA" stamp on one of the primaries right after the flange?
also, what size is the collector? remember, not too many "real" JDM headers have a 2.5" collector. usually 60mm IIRC
also, what size is the collector? remember, not too many "real" JDM headers have a 2.5" collector. usually 60mm IIRC
#19
Honda-Tech Member
Join Date: Nov 2000
Location: Fredericksburg, VA, USA
Posts: 5,135
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible to ID these headers?
Looks to be a copy of the DC JDM header. The DC header had the #3 and #4 tubes lower in the front just like this one. The thing is when this header was copied over the years the idiots who copied it kept the same mistake so it's a dead give away.
#21
A Digital Frontier
Re: Is it possible to ID these headers?
Anything is an upgrade from the header posted. Best bet would be to upgrade to a header built for your setup. SMSP, HYTECH, SSR, ASP, NAH2B (username on here) are some of the big names in this industry.
#22
Honda-Tech Member
Thread Starter
Re: Is it possible to ID these headers?
Thanks, i might even consider some TODA's...i want something with great ground clearance
Thread
Thread Starter
Forum
Replies
Last Post
Jay_D_M
All Motor / Naturally Aspirated
31
10-11-2010 03:48 PM
akire45
Honda Civic / Del Sol (1992 - 2000)
1
05-18-2010 06:46 PM