Bonestock98GS

Ok my car is finally done. I started the car up yesterday. It had leaks so I found all my leaks and fixed them. So we started it up and it cranked first try no problems. My friend noticed that it didnt sound right and actually sounded like a v8 Camming. He told me to pull all the plugs one by one to see which cylinder was not firing. So I proceeded pulling from 1 to 4. At cylinder number 4 I pulled the wire and the car cut off. Went to crank it back up and it wouldnt crank up anymore. So my friends brother came to help out and he said it was getting no spark. So I changed the Ignitor and the coil in the distributor. Went to crank it again and it caught but didnt stay on at all. So my Question is what could be wrong?

1. I have a stock MAP sensor. ECU is ran by Hondata s200 that maybe chipped for another MAP sensor. Could this be why it wont Crank?

2. Is the firing order wrong?

any help would be gladly appreciated Thanks

Also Here is a video to lt you hear how it sounds and possibly tell me whats wrong with it

http://www.youtube.com/watch?v=bjvXooVrv8w

Bonestock98GS

Bump

rich7777

How is your cam timing ? Does everything line up like its suppose to ?

Bonestock98GS

I didnt check my timing yet. what should I look for when I Do check it

sanman000719

crank mark is in the right spot, and the cam gears are as well this is your mechanical timing

Bonestock98GS

Ok thanks I will go check that when I go back to the shop. And I will post and let you guys know what the results are. Thanks again. Oh and another quick questio would the timing being off cause it not to crank?

methodz55

R you running another cars tune? that could be it in for results

Bonestock98GS

Methodz yes it is another cars tune.

methodz55

That might be why diff map senor prob diff inj diff motor set up that could throw it off take it to a shop/tuner

Bonestock98GS

Update: I had another cars tune which was an ecu running s200 with boost option. It cranked once and ran really bad. My friend hooked his S300 up and the car ran smooth. So thanks very much Methodz I appreciate the help buddy