obd2b to obd1 convertion A/C dosnt work, ACS
#1
Honda-Tech Member
Thread Starter
obd2b to obd1 convertion A/C dosnt work, ACS
hi guys,
i did a obd2b to obd1 ecu convertion on a friends car (not with a convertion harness i cut and soldered all the ecu pins,
i tuned the car and it runs gr8 and dosnt have any cel.
but from some reason the A/C dosnt work,
i moved pin a27 from the obd2b harness to the b5 pin on the obd1 harness,
any ideas?
i'v done this cut and solder convertion many times but never had this issue.
thanks
i did a obd2b to obd1 ecu convertion on a friends car (not with a convertion harness i cut and soldered all the ecu pins,
i tuned the car and it runs gr8 and dosnt have any cel.
but from some reason the A/C dosnt work,
i moved pin a27 from the obd2b harness to the b5 pin on the obd1 harness,
any ideas?
i'v done this cut and solder convertion many times but never had this issue.
thanks
#3
Honda-Tech Member
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
myEK=slow
Honda Civic / Del Sol (1992 - 2000)
11
08-21-2006 08:20 PM