F23 crank with F22 rods
#1
Honda-Tech Member
Thread Starter
F23 crank with F22 rods
My tuner is uncertain and I have gotten some vague answers from other tuners in the area and local shop. Some say yes, some say no, but no one seems to elaborate other then "yeah all F series SOHC are the same practically!"
Bottom line, will F22A/B con. rods work on a F23 crank? I have a new F23 crate engine, but havent torn into her yet. Although limited... its a lot easier to find some aftermarket F22 rods than ANY F23 rods.
Thanks again!
Bottom line, will F22A/B con. rods work on a F23 crank? I have a new F23 crate engine, but havent torn into her yet. Although limited... its a lot easier to find some aftermarket F22 rods than ANY F23 rods.
Thanks again!
#3
Honda-Tech Member
Thread Starter
Re: F23 crank with F22 rods
Thanks man, the moment i posted this, i finally saw a chart comparing the mains of the different F series cranks.
What a bummer too, Bisi rods were around $400 for f22's..... and the only f23 rods i can EVER find are some crower rods for the f23.... $800...ouch
What a bummer too, Bisi rods were around $400 for f22's..... and the only f23 rods i can EVER find are some crower rods for the f23.... $800...ouch
Thread
Thread Starter
Forum
Replies
Last Post