I pulled the codes from the cel on my 95 civic d16
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2010
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
I pulled the codes from the cel on my 95 civic d16
Today i went out and checked my cel because it been on for awhile and it was a intake air temperature sensor that i got from it, now would that cause my idle to be kind of loopy? and could i just clean up the sensor?
I also checked my 94 hatch (which it didn't have a cel pop up but i thought i would check) and when i check it the cel stays on is that normal? it has a b20 turbo swap in it.
I also checked my 94 hatch (which it didn't have a cel pop up but i thought i would check) and when i check it the cel stays on is that normal? it has a b20 turbo swap in it.
#2
Honda-Tech Member
Join Date: Feb 2007
Location: Lincoln, CA
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Re: I pulled the codes from the cel on my 95 civic d16
I just had the same problem on my 96 civic but I didnt notich anything different when I fixed it other then no CEL.also the IAT was $28 after tax.
#3
Re: I pulled the codes from the cel on my 95 civic d16
I also checked my 94 hatch (which it didn't have a cel pop up but i thought i would check) and when i check it the cel stays on is that normal? it has a b20 turbo swap in it.
#5
Re: I pulled the codes from the cel on my 95 civic d16
If you don't know where it is located, how do you know it's not unplugged? It's a two wire sensor plugged into the rear of the intake manifold.
TA sensor:
TA sensor:
#6
Honda-Tech Member
Thread Starter
Join Date: Feb 2010
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Re: I pulled the codes from the cel on my 95 civic d16
Yeah it's not unplugged but would u happen to know what color the wires are that go to it because i got another plug that laying around and don't know where it goes.
Thread
Thread Starter
Forum
Replies
Last Post
supercoy101
Honda Civic / Del Sol (1992 - 2000)
14
06-07-2009 10:46 AM