gosu08

Its been awhile but its time to replace my muffler on my 94 accord.

I was looking into the apexi ws2. I would go with the universal one but not sure if I should go with the offset muffler to the left or right...

Im thinking left right?

Anyone have any pics or suggestions on which side?

I have the stock OEM rear lip btw.

Thanks

accord99power

stock is on the right hand side but you can pay to have it where ever you want. mines on the right(passenger) side like stock.

gosu08

which way is the offset on the ws2 system for 94-97 accords?

anyone have any pics of them on their accords?

TheMuffinMan

iTrader: (1)

Why not just buy the Accord specific one..........

19Accord97

Trying to find some of my car when it didn't have a lip in the rear....be warned, it will be ricey if i can find it!

19Accord97

lol fast and furious days



btw, that is a catback WS2, not just the muffler

gosu08

Because I already have 2.5 in exhaust piping. Just want to change my muffler.

Universal either LT or RT ws2 muffer $299 compared to whole exhaust system $639............

That would be great!

Thanks. So it looks like the catbacks for 94-97 accords, the muffler is on the right?

TheMuffinMan

iTrader: (1)

No Accords have exhaust on the left. All the Accords have a muffler on the passenger side with the piping going relatively straight back to right before the rear wheel then cutting over towards the passenger side and then over the sway bar and straight to the muffler. The exception being the wagon which has the tip offset from the muffler.

If you have the piping already then why not line it up under the car, or even beside it and see which you need? Without knowing what brand or type of exhaust pipe you already have who is going to know what it is setup for? That said I believe my WS2 just was straight with no offset.

19Accord97

Im pretty sure the inlet out outlet are not straight on. The WS2 is NOT a straight through design and I am pretty sure the inlet is offset. If everything weren't covered in snow I would take a look.

gosu08

Correct in respects to the 60mm catback systems.

The straight through design with no offset of the outlet is with ONLY the 80mm turbo ws2 muffler.

I already know that Accords don't have exhaust on the left (driver side). I am talking about the offset of the muffler outlet.

My car already has a full 2.5 catback exhaust system. I know how it routes and where it goes. I just want to get a new muffler. There is no need to know what my setup is. This thread was to know which muffler outlet offset would look best (to each their own) and show some pics of their choice to help me with mine. People that know about the ws2 mufflers know that they have 2 choices when it comes to the muffler....either muffler outlet offset to the left or the right. Here is a pic since it seems like you don't know.

Offset left





Offset right


Left and right offset


I am debating on which universal ws2 muffler to get....the one that has the outlet muffler on the right or the outlet muffler on the left.

In respects to the ws2 catback system for the 94-97 accords, which side is the muffler outlet?

TheMuffinMan

iTrader: (1)

I'm 99% sure mine is the Accord application



Best picture I could find when I sold it, it was centered.

TheMuffinMan

iTrader: (1)

No I fully understand what you're asking in regards to the offset, my post was based on this statement:

To which I responded that no Accord has a muffler on the left.

*edit* Only reason I'm posting in here is because I had a WS2 with custom 2.5" piping

TheMuffinMan

iTrader: (1)

Not perfect but the tip was centered and not offset.

TheMuffinMan

iTrader: (1)

Also, https://honda-tech.com/forums/showpo...3&postcount=16



Looks centered to me

19Accord97

The WS outlet was offset, wheras the WS2 is centered. Not sure about the WS inlet.

gosu08

Alright. Well we all know what we are talking about lol.

I have a choice now, I can either get it offset left or right. Im thinking offset left like integras and civics. Yay or nay?

Keep in mind I have the stock rear lip from a 94 accord

gosu08

Got the Apexi WS2 in the mail yesterday and got it installed.

Also for clarification, when you buy the WS2 the left and right offset do not matter. The offset is for the inlet and NOT the outlet as I was informed. The company told me incorrectly.

All outlets for the WS2 universal both NA and Turbo are middle outlets.

It sounds great. I went from a OBX twinloop which was quiet to the WS2 which is even quieter.

I cannot hear the muffler noise over my own motor.

I will post up pics when I get a chance.

nus_dogg

The one posted on post #14 from themuffinman which is my car is a centered tip WS2 muffler welded to a 2.5" exhaust piping.

gosu08

Yeah. You have no option of left or right offset for muffler outlet with the universal setup.

Its only for muffler inlet. I made the mistake of choosing right but it doesnt matter. Any good muffler shop can bend pipes.

I suggest left offset since accord piping is on the passenger side.

All in all very happy. Cant hear the muffler over my engine which surprised me alot. That is how quiet the muffler is. Its been 5 years now since that could be done since i did my first mods.