"the big three" help
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
"the big three" help
So I want to do the big three tO my 96' hatch and have done some research but all research has been general to most cars. I'm relitively new to wiring and electrical on cars but it seems easy. My question(s) are
1. Can I use the valve cover ground to the chassis as the ground for engine block to chassis, or do I use another spot?
2. For the battery positive to the alternator positive, is that the wire that screws into and not plugs into the alternator?
Any and all the help is appreciated, hate to bother and I know info is out there just want to make sure and not blow or short anything so please no negative comments
1. Can I use the valve cover ground to the chassis as the ground for engine block to chassis, or do I use another spot?
2. For the battery positive to the alternator positive, is that the wire that screws into and not plugs into the alternator?
Any and all the help is appreciated, hate to bother and I know info is out there just want to make sure and not blow or short anything so please no negative comments
Thread
Thread Starter
Forum
Replies
Last Post