Cluster Problem..Please HELP!!
Cluster Problem..Please HELP!!
04-04-2010, 07:21 PM
#5
Honda-Tech Member
Join Date: May 2009
Location: Lincoln, RI
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cluster Problem..Please HELP!!
should just plug in and work... find the tach signal wire and check it at both ends for continuity, and check the resistance of the wire while reving the engine to see if the impedance changes with the rpms.
04-04-2010, 07:29 PM
#6
Honda-Tech Member
Thread Starter
Join Date: Jul 2008
Location: YoNk3rZ, NY
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cluster Problem..Please HELP!!
thanks 4 the info ima check in da morning i just want 2 get a bunch of opinions so i can try all of them in the morning...
Trending Topics
04-04-2010, 11:23 PM
#10
Join Date: Feb 2010
Location: BETWEEN LA N DA BAY CA 559
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cluster Problem..Please HELP!!
i had the same problem..i tried a buddy's 96 ex cluster into my car to see how it'll look and the rpm gauge didnt work, but on his car it was perfect..
i checked all the wiring to my cluster and everything looked good..
i ended up connecting a little tach and puttin it right behind my steering wheel..
well...if all else fails run a wire straight from the blue(signal wire) from the dizzy to the cluster wire where the tach signal wire is and that should work for sure..
if u need more info hit me up..
i checked all the wiring to my cluster and everything looked good..
i ended up connecting a little tach and puttin it right behind my steering wheel..
well...if all else fails run a wire straight from the blue(signal wire) from the dizzy to the cluster wire where the tach signal wire is and that should work for sure..
if u need more info hit me up..
05-24-2010, 04:11 AM
#12
Honda-Tech Member
Thread Starter
Join Date: Jul 2008
Location: YoNk3rZ, NY
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cluster Problem..Please HELP!!
i had the same problem..i tried a buddy's 96 ex cluster into my car to see how it'll look and the rpm gauge didnt work, but on his car it was perfect..
i checked all the wiring to my cluster and everything looked good..
i ended up connecting a little tach and puttin it right behind my steering wheel..
well...if all else fails run a wire straight from the blue(signal wire) from the dizzy to the cluster wire where the tach signal wire is and that should work for sure..
if u need more info hit me up..
i checked all the wiring to my cluster and everything looked good..
i ended up connecting a little tach and puttin it right behind my steering wheel..
well...if all else fails run a wire straight from the blue(signal wire) from the dizzy to the cluster wire where the tach signal wire is and that should work for sure..
if u need more info hit me up..
Thread
Thread Starter
Forum
Replies
Last Post