b16 block with b18 head
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2007
Location: \, us
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
b16 block with b18 head
So im looking for parts to piece together my build and i found a cheap never ran b16 block sleeved to 85.5mm with a erl deckplate. I really wanted a c5 and go 84mm for a 2.0L but that b16 is at such a good price will the headeroff a c1, my type R head and everything just switch over??? Is the oil pan different?? trans should just bolt up just worried about the oil pan header ect
#3
Re: b16 block with b18 head
i don't think the crank will work, as far as mains i think it depends on if it's a b16a or b block because b16b comes with block girdle as where b16a doesn't. Yes the head will swap right over. header will swap over, oil pan will work although u may need extra oil because i think it's taller to compensate for the block girdle.
Thread
Thread Starter
Forum
Replies
Last Post