shiftyjm's 1991 EF STD Project
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Location: Vancouver, B.C
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
shiftyjm's 1991 hatch - update 02/06/2013
Some of you know me and my car, but I've decided to make a new thread for my car. For people who do not know me, I'm currently 20yrs old. I sold my old bagged b2200 and bought this car with the swap back in 08' for about the price of a complete B-Series swap (at the time) just after the summer of graduation. This won't be a very fast build as I am only doing what I can afford.
I am open to criticism but only if it is constructive. Keep flaming and negative comments to yourself and keep my thread clean please. Thanks.
When I bought the car:
-JDM B16A swap [160hp] (33,xxxkm on engine)
-Adjustible Fuel Pressure regulator & gauge
- YS-1 LS transmission
-Centreforce Stage 2 Clutch w/Dual-friction Disc
-'92 integra 4-wheel disc brake swap [Trailing arms, knuckles, M.C., Booster & Prop. Valve]
-195/60/14 Fuzion HRi Tires (85+% tread)
-'91 JDM Civic SIR gauge cluster
-Civic SI rear swaybar set-up
-Full 2.5" Mandrel-bent exhaust (cross-laid muffler, not fart-can) [Test-pipe & Bolt-in Catalytic Converter included]
-'00 Prelude Heated Adjustible Leather seats
-Megan Racing Short-throw shifter w/all new polyurethane shifter linkage bushings
-Pioneer mp3/cd/wma deck w/Infinity 6.5" speakers
When I got the car this is what it looked like:
Lowerd it
Engine bay after having the car for a little bit
Swapped the black bumpers for white Si bumpers and a front lip.
I bought a set of 15" SSR knock off rims with 195/50/15 Toyo T1S tires. Also got some powerslot rotors when I did the front brakes.
Got Si front and rear seats and had the back half of the interior out
And took the car to the track.
Swapped the black taillight filler piece with a red one and got euro zc 1.6i-16 decal and painted the side moldings with SEM black trim paint.
I am open to criticism but only if it is constructive. Keep flaming and negative comments to yourself and keep my thread clean please. Thanks.
When I bought the car:
-JDM B16A swap [160hp] (33,xxxkm on engine)
-Adjustible Fuel Pressure regulator & gauge
- YS-1 LS transmission
-Centreforce Stage 2 Clutch w/Dual-friction Disc
-'92 integra 4-wheel disc brake swap [Trailing arms, knuckles, M.C., Booster & Prop. Valve]
-195/60/14 Fuzion HRi Tires (85+% tread)
-'91 JDM Civic SIR gauge cluster
-Civic SI rear swaybar set-up
-Full 2.5" Mandrel-bent exhaust (cross-laid muffler, not fart-can) [Test-pipe & Bolt-in Catalytic Converter included]
-'00 Prelude Heated Adjustible Leather seats
-Megan Racing Short-throw shifter w/all new polyurethane shifter linkage bushings
-Pioneer mp3/cd/wma deck w/Infinity 6.5" speakers
When I got the car this is what it looked like:
Lowerd it
Engine bay after having the car for a little bit
Swapped the black bumpers for white Si bumpers and a front lip.
I bought a set of 15" SSR knock off rims with 195/50/15 Toyo T1S tires. Also got some powerslot rotors when I did the front brakes.
Got Si front and rear seats and had the back half of the interior out
And took the car to the track.
Swapped the black taillight filler piece with a red one and got euro zc 1.6i-16 decal and painted the side moldings with SEM black trim paint.
Last edited by shiftyjm; 02-06-2013 at 07:52 PM.
#2
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Location: Vancouver, B.C
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: shiftyjm's 1991 EF STD Project
Yesterday after work I attempted to do a "tuck" on driver side of the engine bay. I was able to do it with out having to cut anything. I wasn't going for the complete 0 wire tuck but to just clean it up a bit. I ran the wires down along the rail underneath the motor mount and underneath the brake booster. The resistor box is still there but it was painted and a few brackets were trimmed off where needed. I'm satisfied as it looks a bit cleaner.
Last edited by shiftyjm; 07-28-2011 at 01:40 PM.
#6
Honda-Tech Member
Join Date: May 2009
Location: So-Cal
Posts: 1,722
Likes: 0
Received 0 Likes
on
0 Posts
Re: shiftyjm's 1991 EF STD Project
Once again I hate fking thieves and they will always get it in the end. Karma is a bitch *****!
The car looks great. I love white ED's.
The car looks great. I love white ED's.
#7
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Location: Vancouver, B.C
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: shiftyjm's 1991 EF STD Project
Those bassworx subs were sold and I put in the dd1512. I had it in there for a little over a year maybe then it got broken into just before Christmas of 2009 and they stole the sub and box and didn't touch anything else. I bought the compustar pro 2 way and a type R 12" sub in a small sealed box and that's all that's in there right now.
Thanks for the comments everyone
Thanks for the comments everyone
Trending Topics
#8
Honda-Tech Member
Re: shiftyjm's 1991 EF STD Project
man, i was expecting some beat up honda with the stock b1 in it... instead i find this clean thing. very nice car man! hardly a std any more!
#9
Honda-Tech Member
Join Date: Oct 2009
Location: Its GUEST! Not QUEST! PA
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Re: shiftyjm's 1991 EF STD Project
^ SAME THING RYAN! lol I was like, "std, oh well lets see a piece of....oh...dear...lord..... " bahaha
Looks good man
Looks good man
#12
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Location: Vancouver, B.C
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
#16
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Location: Vancouver, B.C
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: shiftyjm's 1991 EF STD Project
Here's some pictures from a mini "shoot" we did tonight. Photos courtesy of Bensta.
Thanks for looking
Thanks for looking
Last edited by shiftyjm; 07-28-2011 at 01:41 PM.
#23
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Location: Vancouver, B.C
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: shiftyjm's 1991 EF STD Project
Thanks everyone else for the comments!