SHG is back! Easy's EP3 goes under the knife...
#2027
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: SHG is back! Easy's EP3 goes under the knife...
Took 3 days but I went through every page. Awesome build, pretty much everything I dig about the honda scene. When I find other like minded people it gives me hope. Great stuff all the way through. I plan on starting one for my dc5 on here sometime soon. I started one on NWP but purpose built cars or daily drivers don't seem to get much love on there. Thanks for the inspiration.
The stuff I did behind the 1/4 panel plastics did help alot. Exhaust drone was definitely quieter, as well as road noise especially in the rain. I haven't gotten to drive the car since I finished the trunk and the doors though.
#2030
Re: SHG is back! Easy's EP3 goes under the knife...
just gotta wait like 13 more days till I can make one. Its gonna be slow, but I got alot to fix/restore. Got a few custom parts planned too. Nothing on the level of some of your stuff though Right now just trying to figure out the suspension.
#2032
Honda-Tech Member
Re: SHG is back! Easy's EP3 goes under the knife...
Im stoked for the next update. I almost walked away from a lot today with a EP3 because of this tread, I might have to go back for it.
#2033
Honda-Tech Member
Join Date: Dec 2005
Location: Chicago, Illinois, United States
Posts: 1,007
Likes: 0
Received 0 Likes
on
0 Posts
Re: SHG is back! Easy's EP3 goes under the knife...
Is the feel's dampers, dampening adjusted from the top? I ask because if they are, are you going to have to drill a hole in the shock tower to accomodate access to the adjustment screw because of the caster plates?
#2034
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: SHG is back! Easy's EP3 goes under the knife...
Update tonight with alot of good stuff. We had our launch party last night and it was a blast. SHG product line and apparel was intruduced, as well as the new web site! Working on photos and media for the products this week so keep an eye on the website or facebook page
http://purehondasports.us/
#2035
Honda-Tech Member
Join Date: Sep 2004
Location: North Carolina
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
Re: SHG is back! Easy's EP3 goes under the knife...
I don't normally find myself on HT much anymore. However, every time I do, I check out your car and your progress. I hate it though, because it always makes me think about getting another Honda/EP haha. Anyway, keep up the great work.
#2037
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: SHG is back! Easy's EP3 goes under the knife...
Hey guys, now that the craziness has calmed down I finally had a day to spend working on the car... Ive had a bunch of things up in the air like the valve cover and suspension, and finally got some of the parts Ive been waiting on to complete them
For the front struts I had custom stainless shoulder bushings made so I could install the Todd's top hats. I also had to have the upper perch seat machined a bit for clearance, and topped it off with new stainless nuts.
.
.
Installed the struts and the knuckles and brakes. Starting to come together now!
.
.
Rear shocks are also back in
.
.
Laser etched badges finally got done so I threw one on my valve cover...Also pictured is the new production version of our dipstick retainer
For the front struts I had custom stainless shoulder bushings made so I could install the Todd's top hats. I also had to have the upper perch seat machined a bit for clearance, and topped it off with new stainless nuts.
.
.
Installed the struts and the knuckles and brakes. Starting to come together now!
.
.
Rear shocks are also back in
.
.
Laser etched badges finally got done so I threw one on my valve cover...Also pictured is the new production version of our dipstick retainer
Last edited by SHG_EasyE; 02-14-2012 at 12:14 PM.
#2039
Re: SHG is back! Easy's EP3 goes under the knife...
Sweet update, everything looks great. Now we just gotta work on the D series version of the VC
I'm jealous of how clean your wheel wells stay and look. Can't wait for mine to be like that one day...
Btw, I hooked up the horn. Going for my inspection tomorrow! Executive auto is the place right?
I'm jealous of how clean your wheel wells stay and look. Can't wait for mine to be like that one day...
Btw, I hooked up the horn. Going for my inspection tomorrow! Executive auto is the place right?
#2040
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: SHG is back! Easy's EP3 goes under the knife...
Sweet update, everything looks great. Now we just gotta work on the D series version of the VC
I'm jealous of how clean your wheel wells stay and look. Can't wait for mine to be like that one day...
Btw, I hooked up the horn. Going for my inspection tomorrow! Executive auto is the place right?
I'm jealous of how clean your wheel wells stay and look. Can't wait for mine to be like that one day...
Btw, I hooked up the horn. Going for my inspection tomorrow! Executive auto is the place right?
And yeah the place is executive auto, on 126
#2041
Honda-Tech Member
Re: SHG is back! Easy's EP3 goes under the knife...
Were the shoulder nuts that came with your plates the wrong size or was there a different reason for not using them?
Last edited by SHG_James; 02-13-2012 at 03:13 AM.
#2042
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: SHG is back! Easy's EP3 goes under the knife...
Yeah they were totally not right for my struts so I had to make a traditional bushing and nut instead of the threaded shoulder bushing that came with the todd's hats.